OE9XVI-6 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object OE9XVI-6. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Eff1h*	Temp*
1765569821	12.23 Volt	930 Pkt	76 Pcnt	-64 °c
1765569521	12.23 Volt	920 Pkt	76 Pcnt	-64 °c
1765569225	12.23 Volt	930 Pkt	77 Pcnt	-64 °c
1765568921	12.23 Volt	930 Pkt	77 Pcnt	-64 °c
1765568621	12.3 Volt	960 Pkt	78 Pcnt	-64 °c
1765568321	12.08 Volt	960 Pkt	78 Pcnt	-64 °c
1765568021	12.23 Volt	960 Pkt	79 Pcnt	-64 °c
1765567721	11.93 Volt	940 Pkt	78 Pcnt	-64 °c
1765567421	12.23 Volt	940 Pkt	78 Pcnt	-64 °c
1765567121	12.3 Volt	920 Pkt	77 Pcnt	-64 °c
1765566821	12.23 Volt	930 Pkt	77 Pcnt	-64 °c
1765566521	11.85 Volt	930 Pkt	78 Pcnt	-64 °c
1765566221	12.23 Volt	920 Pkt	78 Pcnt	-64 °c
1765565921	12.23 Volt	930 Pkt	78 Pcnt	-64 °c
1765565621	12.23 Volt	950 Pkt	79 Pcnt	-64 °c
1765565321	11.85 Volt	950 Pkt	79 Pcnt	-64 °c
1765565042	12.23 Volt	950 Pkt	79 Pcnt	-64 °c
1765564721	12.23 Volt	970 Pkt	79 Pcnt	-64 °c
1765564421	12.23 Volt	980 Pkt	78 Pcnt	-64 °c
1765564121	12.23 Volt	1000 Pkt	77 Pcnt	-64 °c
1765563821	12.23 Volt	1000 Pkt	77 Pcnt	-64 °c
1765563521	12 Volt	1040 Pkt	78 Pcnt	-64 °c
1765563221	12.23 Volt	1030 Pkt	77 Pcnt	-64 °c
1765562921	12.3 Volt	1030 Pkt	77 Pcnt	-64 °c
1765562621	12.23 Volt	1030 Pkt	76 Pcnt	-64 °c

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Temp: 0, 0.5, -64

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)