HS9LWR-3 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object HS9LWR-3. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 >>

Time	PM1.0*	PM2.5*	PM10*	RSSI*	Voltage*
1757595847	9 ug/m3	10 ug/m3	12 ug/m3	-53 dBm	0.27 V
1757594602	10 ug/m3	13 ug/m3	14 ug/m3	-54 dBm	0.27 V
1757593980	13 ug/m3	16 ug/m3	16 ug/m3	-54 dBm	0.27 V
1757593343	11 ug/m3	12 ug/m3	12 ug/m3	-54 dBm	0.27 V
1757592671	9 ug/m3	15 ug/m3	15 ug/m3	-54 dBm	0.29 V
1757592049	12 ug/m3	15 ug/m3	15 ug/m3	-54 dBm	0.27 V
1757590804	13 ug/m3	16 ug/m3	16 ug/m3	-54 dBm	0.27 V
1757590182	12 ug/m3	14 ug/m3	15 ug/m3	-54 dBm	0.27 V
1757589567	10 ug/m3	12 ug/m3	13 ug/m3	-54 dBm	0.45 V
1757588938	12 ug/m3	16 ug/m3	19 ug/m3	-55 dBm	1.13 V
1757588316	9 ug/m3	11 ug/m3	13 ug/m3	-54 dBm	2.07 V
1757587694	11 ug/m3	14 ug/m3	16 ug/m3	-53 dBm	3.61 V
1757587072	12 ug/m3	16 ug/m3	16 ug/m3	-55 dBm	4.39 V
1757586450	13 ug/m3	15 ug/m3	17 ug/m3	-54 dBm	5.25 V
1757585828	13 ug/m3	18 ug/m3	18 ug/m3	-55 dBm	6.32 V
1757585217	14 ug/m3	18 ug/m3	18 ug/m3	-53 dBm	7.01 V
1757584583	16 ug/m3	19 ug/m3	20 ug/m3	-57 dBm	7.16 V
1757583960	17 ug/m3	21 ug/m3	21 ug/m3	-57 dBm	7.75 V
1757583338	17 ug/m3	21 ug/m3	23 ug/m3	-56 dBm	8.18 V
1757582715	18 ug/m3	25 ug/m3	26 ug/m3	-55 dBm	8.63 V
1757582093	18 ug/m3	23 ug/m3	25 ug/m3	-56 dBm	8.16 V
1757581471	19 ug/m3	24 ug/m3	25 ug/m3	-55 dBm	7.18 V
1757580849	19 ug/m3	23 ug/m3	29 ug/m3	-56 dBm	7.44 V
1757580238	19 ug/m3	23 ug/m3	25 ug/m3	-55 dBm	7.75 V
1757579605	20 ug/m3	27 ug/m3	27 ug/m3	-55 dBm	7.98 V

*Used Equation Coefficients:

PM1.0: 0, 1, 0

PM2.5: 0, 1, 0

PM10: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)