vu2eoj-13 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object vu2eoj-13. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vcell*	RSSI*	Light*	Awake*
1753797016	4.65 Vdc	-71 dBm	0 lux	4.1 secs
1753796441	4.66 Vdc	-71 dBm	0 lux	5.1 secs
1753795867	4.65 Vdc	-80 dBm	1 lux	3.9 secs
1753795296	4.68 Vdc	-72 dBm	16 lux	4.5 secs
1753789804	4.66 Vdc	-77 dBm	9 lux	4.8 secs
1753788654	4.66 Vdc	-72 dBm	25 lux	17.5 secs
1753788067	4.67 Vdc	-79 dBm	16 lux	9.2 secs
1753787506	4.66 Vdc	-78 dBm	25 lux	20.2 secs
1753784600	4.66 Vdc	-84 dBm	49 lux	14.5 secs
1753783450	4.66 Vdc	-87 dBm	36 lux	8.3 secs
1753782872	4.66 Vdc	-83 dBm	81 lux	11.9 secs
1753782298	4.65 Vdc	-84 dBm	49 lux	3.2 secs
1753780567	4.66 Vdc	-81 dBm	64 lux	3.2 secs
1753779989	4.66 Vdc	-74 dBm	64 lux	13.3 secs
1753779416	4.66 Vdc	-84 dBm	64 lux	9.1 secs
1753778266	4.66 Vdc	-86 dBm	121 lux	3.8 secs
1753776781	4.66 Vdc	-71 dBm	64 lux	3.9 secs
1753775855	4.66 Vdc	-72 dBm	121 lux	4.1 secs
1753773041	4.66 Vdc	-74 dBm	49 lux	15.9 secs
1753770732	4.66 Vdc	-84 dBm	81 lux	4.1 secs
1753770152	4.67 Vdc	-80 dBm	100 lux	6.4 secs
1753768428	4.65 Vdc	-80 dBm	144 lux	4.9 secs
1753761490	4.66 Vdc	-83 dBm	100 lux	3.8 secs
1753760914	4.66 Vdc	-74 dBm	100 lux	6.7 secs
1753760342	4.66 Vdc	-84 dBm	81 lux	3.6 secs

*Used Equation Coefficients:

Vcell: 0, 0.01, 2.5

RSSI: 0, -1, 0

Light: 1, 0, 0

Awake: 0, 0.1, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)