LU8EJA Telemetry

This is the latest recevied telemetry packets stored in our database for station/object LU8EJA. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxTraffic*	TxTraffic*	RxDrop*	RSSI*	Voltage*
1765516749	0 Pkt	0 Pkt	0 Pkt	-56 dBm	11.94 V
1765514927	0 Pkt	0 Pkt	0 Pkt	-55 dBm	11.94 V
1765513105	0 Pkt	0 Pkt	0 Pkt	-56 dBm	11.94 V
1765511283	0 Pkt	0 Pkt	0 Pkt	-57 dBm	11.94 V
1765509461	0 Pkt	0 Pkt	0 Pkt	-56 dBm	11.94 V
1765507639	0 Pkt	6 Pkt	0 Pkt	-57 dBm	11.94 V
1765505817	0 Pkt	6 Pkt	0 Pkt	-58 dBm	11.94 V
1765503995	0 Pkt	9 Pkt	0 Pkt	-57 dBm	11.94 V
1765502172	0 Pkt	6 Pkt	0 Pkt	-56 dBm	11.94 V
1765500350	0 Pkt	6 Pkt	0 Pkt	-56 dBm	11.94 V
1765498531	10 Pkt	6 Pkt	6 Pkt	-51 dBm	11.94 V
1765494868	39 Pkt	6 Pkt	31 Pkt	-53 dBm	11.94 V
1765493032	29 Pkt	3 Pkt	29 Pkt	-58 dBm	11.94 V
1765491201	9 Pkt	2 Pkt	9 Pkt	-59 dBm	11.94 V
1765490603	24 Pkt	10 Pkt	39 Pkt	-52 dBm	11.94 V
1765486933	63 Pkt	10 Pkt	46 Pkt	-51 dBm	11.94 V
1765485090	30 Pkt	15 Pkt	36 Pkt	-50 dBm	11.92 V
1765483255	29 Pkt	7 Pkt	35 Pkt	-50 dBm	11.94 V
1765481423	39 Pkt	3 Pkt	38 Pkt	-49 dBm	11.94 V
1765479591	4 Pkt	0 Pkt	2 Pkt	-51 dBm	11.94 V
1765478384	29 Pkt	6 Pkt	37 Pkt	-50 dBm	11.94 V
1765476551	25 Pkt	6 Pkt	31 Pkt	-50 dBm	11.94 V
1765472886	2 Pkt	0 Pkt	2 Pkt	-50 dBm	11.94 V
1765469180	26 Pkt	12 Pkt	45 Pkt	-72 dBm	11.92 V
1765467347	25 Pkt	15 Pkt	49 Pkt	-76 dBm	11.92 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)