KC2MDN-2 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object KC2MDN-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1784668017	14.48 Volt	820 Pkt	170 Pkt	61 Pcnt
1784667417	14.48 Volt	810 Pkt	180 Pkt	62 Pcnt
1784667299	14.48 Volt	810 Pkt	200 Pkt	63 Pcnt
1784667289	14.48 Volt	810 Pkt	200 Pkt	64 Pcnt
1784666818	14.48 Volt	800 Pkt	180 Pkt	63 Pcnt
1784666216	14.48 Volt	810 Pkt	200 Pkt	63 Pcnt
1784665617	14.48 Volt	810 Pkt	200 Pkt	64 Pcnt
1784665380	14.4 Volt	790 Pkt	190 Pkt	62 Pcnt
1784665369	14.4 Volt	820 Pkt	200 Pkt	63 Pcnt
1784665017	14.48 Volt	810 Pkt	200 Pkt	64 Pcnt
1784664417	14.4 Volt	790 Pkt	190 Pkt	62 Pcnt
1784663817	14.4 Volt	820 Pkt	200 Pkt	63 Pcnt
1784663463	14.48 Volt	750 Pkt	180 Pkt	60 Pcnt
1784663452	14.48 Volt	750 Pkt	170 Pkt	60 Pcnt
1784663218	14.4 Volt	780 Pkt	190 Pkt	61 Pcnt
1784662617	14.48 Volt	750 Pkt	180 Pkt	60 Pcnt
1784662017	14.48 Volt	750 Pkt	170 Pkt	60 Pcnt
1784661537	14.48 Volt	690 Pkt	160 Pkt	61 Pcnt
1784661418	14.4 Volt	700 Pkt	170 Pkt	60 Pcnt
1784660818	14.4 Volt	700 Pkt	170 Pkt	60 Pcnt
1784660217	14.48 Volt	690 Pkt	160 Pkt	61 Pcnt
1784659619	14.48 Volt	680 Pkt	140 Pkt	62 Pcnt
1784659017	14.48 Volt	710 Pkt	140 Pkt	63 Pcnt
1784658417	14.48 Volt	730 Pkt	150 Pkt	64 Pcnt
1784657817	14.48 Volt	740 Pkt	150 Pkt	64 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)