YM2KBI-4 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object YM2KBI-4. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxTraffic*	TxTraffic*	RxDrop*	RSSI*	Voltage*
1789966788	20 Pkt	15 Pkt	0 Pkt	-71 dBm	0.14 V
1789966058	30 Pkt	12 Pkt	0 Pkt	-70 dBm	0.14 V
1789965328	24 Pkt	12 Pkt	0 Pkt	-70 dBm	0.14 V
1789964598	28 Pkt	15 Pkt	1 Pkt	-71 dBm	0.14 V
1789963868	28 Pkt	13 Pkt	0 Pkt	-71 dBm	0.14 V
1789963138	25 Pkt	15 Pkt	0 Pkt	-69 dBm	0.14 V
1789962409	19 Pkt	8 Pkt	0 Pkt	-69 dBm	0.14 V
1789961678	28 Pkt	2 Pkt	2 Pkt	-70 dBm	0.14 V
1789960948	1 Pkt	0 Pkt	0 Pkt	-69 dBm	0.14 V
1789960594	33 Pkt	13 Pkt	0 Pkt	-71 dBm	0.14 V
1789959864	18 Pkt	18 Pkt	1 Pkt	-70 dBm	0.14 V
1789959134	34 Pkt	15 Pkt	1 Pkt	-70 dBm	0.14 V
1789958404	21 Pkt	18 Pkt	2 Pkt	-71 dBm	0.14 V
1789957674	34 Pkt	15 Pkt	0 Pkt	-70 dBm	0.14 V
1789956944	23 Pkt	16 Pkt	1 Pkt	-70 dBm	0.14 V
1789956214	24 Pkt	14 Pkt	2 Pkt	-70 dBm	0.14 V
1789955484	32 Pkt	16 Pkt	0 Pkt	-71 dBm	0.14 V
1789954754	20 Pkt	17 Pkt	1 Pkt	-71 dBm	0.16 V
1789954024	22 Pkt	15 Pkt	0 Pkt	-70 dBm	0.14 V
1789953294	17 Pkt	19 Pkt	0 Pkt	-71 dBm	0.14 V
1789952564	25 Pkt	16 Pkt	1 Pkt	-71 dBm	0.16 V
1789951834	24 Pkt	15 Pkt	0 Pkt	-68 dBm	0.14 V
1789951104	22 Pkt	15 Pkt	2 Pkt	-69 dBm	0.14 V
1789950374	43 Pkt	11 Pkt	0 Pkt	-69 dBm	0.14 V
1789949644	37 Pkt	17 Pkt	1 Pkt	-70 dBm	0.14 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)