HS6KLJ-13 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object HS6KLJ-13. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RF->INET*	INET->RF*	AllCount*
1776674924	0 Pkts	4 Pkts	12 Pkts
1776674324	0 Pkts	4 Pkts	14 Pkts
1776673724	0 Pkts	3 Pkts	17 Pkts
1776673124	0 Pkts	4 Pkts	18 Pkts
1776672524	0 Pkts	4 Pkts	12 Pkts
1776671924	0 Pkts	3 Pkts	13 Pkts
1776671328	0 Pkts	4 Pkts	12 Pkts
1776670724	0 Pkts	4 Pkts	14 Pkts
1776670124	0 Pkts	3 Pkts	11 Pkts
1776669524	0 Pkts	4 Pkts	21 Pkts
1776668924	0 Pkts	7 Pkts	15 Pkts
1776668324	0 Pkts	3 Pkts	13 Pkts
1776667730	0 Pkts	4 Pkts	12 Pkts
1776667124	0 Pkts	6 Pkts	26 Pkts
1776666524	0 Pkts	18 Pkts	31 Pkts
1776665924	0 Pkts	16 Pkts	42 Pkts
1776665324	0 Pkts	3 Pkts	3 Pkts
1776664725	2 Pkts	2 Pkts	6 Pkts
1776664125	0 Pkts	3 Pkts	3 Pkts
1776663525	0 Pkts	3 Pkts	5 Pkts
1776662925	0 Pkts	2 Pkts	3 Pkts
1776662325	0 Pkts	3 Pkts	4 Pkts
1776661725	0 Pkts	3 Pkts	3 Pkts
1776661125	0 Pkts	2 Pkts	4 Pkts
1776660525	0 Pkts	3 Pkts	3 Pkts

*Used Equation Coefficients:

RF->INET: 0, 1, 0

INET->RF: 0, 1, 0

Repeater: 0, 1, 0

AllCount: 0, 1, 0

AllDrop: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)