DB0JEN Telemetry

This is the latest recevied telemetry packets stored in our database for station/object DB0JEN. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*	Eff*
1773041962	14.63 Volt	300 Pkt	90 Pkt	70 Pcnt	71 Pcnt
1773040761	14.25 Volt	370 Pkt	100 Pkt	66 Pcnt	71 Pcnt
1773039560	13.95 Volt	380 Pkt	100 Pkt	64 Pcnt	71 Pcnt
1773038358	13.65 Volt	400 Pkt	90 Pkt	61 Pcnt	71 Pcnt
1773037157	13.2 Volt	400 Pkt	90 Pkt	61 Pcnt	71 Pcnt
1773035956	12.83 Volt	440 Pkt	100 Pkt	60 Pcnt	71 Pcnt
1773034755	12.75 Volt	460 Pkt	110 Pkt	62 Pcnt	71 Pcnt
1773033554	12.75 Volt	440 Pkt	120 Pkt	65 Pcnt	71 Pcnt
1773032353	12.75 Volt	420 Pkt	100 Pkt	69 Pcnt	71 Pcnt
1773031152	12.75 Volt	400 Pkt	100 Pkt	72 Pcnt	71 Pcnt
1773029951	12.75 Volt	410 Pkt	100 Pkt	73 Pcnt	71 Pcnt
1773028749	12.75 Volt	420 Pkt	110 Pkt	75 Pcnt	71 Pcnt
1773027548	12.83 Volt	420 Pkt	110 Pkt	73 Pcnt	71 Pcnt
1773026347	12.83 Volt	420 Pkt	130 Pkt	72 Pcnt	71 Pcnt
1773025146	12.68 Volt	420 Pkt	140 Pkt	72 Pcnt	71 Pcnt
1773023945	12.83 Volt	440 Pkt	150 Pkt	73 Pcnt	71 Pcnt
1773022743	12.83 Volt	430 Pkt	140 Pkt	73 Pcnt	71 Pcnt
1773021544	12.75 Volt	420 Pkt	140 Pkt	71 Pcnt	71 Pcnt
1773020341	12.6 Volt	410 Pkt	140 Pkt	72 Pcnt	71 Pcnt
1773019141	12.83 Volt	410 Pkt	140 Pkt	68 Pcnt	71 Pcnt
1773017939	12.9 Volt	430 Pkt	140 Pkt	69 Pcnt	71 Pcnt
1773015537	12.9 Volt	440 Pkt	150 Pkt	72 Pcnt	71 Pcnt
1773014335	12.9 Volt	430 Pkt	150 Pkt	70 Pcnt	71 Pcnt
1773013136	12.9 Volt	410 Pkt	150 Pkt	69 Pcnt	71 Pcnt
1773011934	12.9 Volt	390 Pkt	150 Pkt	68 Pcnt	71 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Eff: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)