VE7EOL-2 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object VE7EOL-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Battery*	Temp*
1789962699	12.92 Volts	27.1 Deg.C
1789962689	12.8 Volts	27.1 Deg.C
1789962664	12.89 Volts	26.61 Deg.C
1789962663	12.89 Volts	26.61 Deg.C
1789962663	12.89 Volts	27.1 Deg.C
1789962660	12.92 Volts	26.61 Deg.C
1789962616	12.95 Volts	27.1 Deg.C
1789962607	12.86 Volts	26.61 Deg.C
1789962549	12.92 Volts	27.1 Deg.C
1789962539	12.89 Volts	27.1 Deg.C
1789962535	12.89 Volts	27.1 Deg.C
1789962533	12.83 Volts	27.1 Deg.C
1789962495	12.92 Volts	27.1 Deg.C
1789962494	12.89 Volts	27.1 Deg.C
1789962493	12.92 Volts	27.1 Deg.C
1789962448	12.86 Volts	26.61 Deg.C
1789962403	13.07 Volts	26.61 Deg.C
1789962397	13.19 Volts	27.59 Deg.C
1789962336	13.01 Volts	26.12 Deg.C
1789962239	12.95 Volts	25.63 Deg.C
1789962139	12.95 Volts	26.12 Deg.C
1789962139	12.95 Volts	26.12 Deg.C
1789962101	12.95 Volts	25.14 Deg.C
1789962094	13.01 Volts	25.14 Deg.C
1789962091	12.98 Volts	25.14 Deg.C

*Used Equation Coefficients:

Battery: 0, 0.0293, 0

Temp: 0, 0.489, -273.15

Value3: 0, 1, 0

Value4: 0, 1, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)