LU2DKV-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object LU2DKV-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxTraffic*	TxTraffic*	RxDrop*	RSSI*	Voltage*
1766067325	3 Pkt	14 Pkt	2 Pkt	-53 dBm	13.47 V
1766065489	43 Pkt	22 Pkt	16 Pkt	-54 dBm	13.39 V
1766063662	51 Pkt	26 Pkt	9 Pkt	-55 dBm	13.6 V
1766061836	25 Pkt	4 Pkt	2 Pkt	-54 dBm	13.66 V
1766029435	0 Pkt	0 Pkt	0 Pkt	-55 dBm	13.49 V
1766029109	19 Pkt	9 Pkt	3 Pkt	-55 dBm	13.35 V
1766027285	1 Pkt	7 Pkt	1 Pkt	-54 dBm	13.8 V
1766025463	0 Pkt	11 Pkt	0 Pkt	-55 dBm	13.45 V
1766023641	0 Pkt	27 Pkt	0 Pkt	-59 dBm	13.49 V
1766021818	0 Pkt	5 Pkt	0 Pkt	-56 dBm	14.05 V
1766019995	1 Pkt	15 Pkt	0 Pkt	-58 dBm	13.04 V
1766018173	17 Pkt	34 Pkt	29 Pkt	-57 dBm	13.64 V
1766016349	10 Pkt	7 Pkt	4 Pkt	-55 dBm	13.47 V
1766014527	11 Pkt	0 Pkt	7 Pkt	-53 dBm	13.9 V
1766012704	7 Pkt	10 Pkt	7 Pkt	-52 dBm	13.64 V
1766011100	25 Pkt	25 Pkt	15 Pkt	-55 dBm	13.95 V
1766009276	24 Pkt	29 Pkt	4 Pkt	-53 dBm	14.07 V
1766007452	60 Pkt	23 Pkt	8 Pkt	-54 dBm	13.37 V
1766003803	10 Pkt	16 Pkt	8 Pkt	-54 dBm	13.6 V
1766001980	15 Pkt	15 Pkt	7 Pkt	-54 dBm	13.68 V
1765998334	15 Pkt	0 Pkt	2 Pkt	-55 dBm	13.17 V
1765997051	11 Pkt	9 Pkt	6 Pkt	-54 dBm	13.25 V
1765995218	17 Pkt	20 Pkt	6 Pkt	-55 dBm	13.21 V
1765993394	10 Pkt	18 Pkt	9 Pkt	-53 dBm	13.25 V
1765991571	21 Pkt	25 Pkt	9 Pkt	-55 dBm	12.8 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)