S59DGO-5 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object S59DGO-5. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Temp*	U2*	U1*	Rx1h*	Eff1h*
1776620347	11 C	13.2 Volt	12.9 Volt	870 Pkt	48 Pcnt
1776620051	11 C	13.2 Volt	12.9 Volt	880 Pkt	49 Pcnt
1776620047	11 C	13.2 Volt	12.9 Volt	880 Pkt	49 Pcnt
1776619747	11 C	13.3 Volt	13 Volt	860 Pkt	48 Pcnt
1776619447	11 C	13.3 Volt	13 Volt	850 Pkt	48 Pcnt
1776619148	11 C	13.4 Volt	13 Volt	840 Pkt	48 Pcnt
1776619147	11 C	13.4 Volt	13 Volt	840 Pkt	48 Pcnt
1776618847	11 C	13.4 Volt	13 Volt	830 Pkt	48 Pcnt
1776618547	11 C	13.4 Volt	13.1 Volt	830 Pkt	49 Pcnt
1776618248	11 C	13.5 Volt	13.2 Volt	810 Pkt	48 Pcnt
1776618247	11 C	13.5 Volt	13.2 Volt	810 Pkt	48 Pcnt
1776617947	11 C	13.5 Volt	13.2 Volt	790 Pkt	47 Pcnt
1776617648	11 C	13.5 Volt	13.1 Volt	810 Pkt	48 Pcnt
1776617350	11 C	13.6 Volt	13.1 Volt	790 Pkt	48 Pcnt
1776617347	11 C	13.6 Volt	13.1 Volt	790 Pkt	48 Pcnt
1776617047	11 C	13.7 Volt	13.3 Volt	790 Pkt	48 Pcnt
1776616747	11 C	13.6 Volt	13.3 Volt	790 Pkt	49 Pcnt
1776616449	11 C	13.8 Volt	13.5 Volt	770 Pkt	48 Pcnt
1776616447	11 C	13.8 Volt	13.5 Volt	770 Pkt	48 Pcnt
1776616147	11 C	13.8 Volt	13.3 Volt	780 Pkt	48 Pcnt
1776615847	11 C	13.9 Volt	13.4 Volt	800 Pkt	48 Pcnt
1776615550	11 C	13.8 Volt	13.3 Volt	800 Pkt	48 Pcnt
1776615547	11 C	13.8 Volt	13.3 Volt	800 Pkt	48 Pcnt
1776615247	11 C	13.8 Volt	13.2 Volt	800 Pkt	47 Pcnt
1776614947	11 C	13.8 Volt	13.3 Volt	800 Pkt	47 Pcnt

*Used Equation Coefficients:

Temp: 0, 0.5, -64

U2: 0, 0.1, 0

U1: 0, 0.1, 0

Rx1h: 0, 10, 0

Eff1h: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)