HG4HNA-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object HG4HNA-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1765788744	14.18 Volt	1010 Pkt	50 Pkt	81 Pcnt
1765788744	14.18 Volt	1010 Pkt	50 Pkt	81 Pcnt
1765788444	14.18 Volt	1020 Pkt	50 Pkt	81 Pcnt
1765788144	14.18 Volt	1020 Pkt	40 Pkt	80 Pcnt
1765788144	14.18 Volt	1020 Pkt	40 Pkt	80 Pcnt
1765787844	14.1 Volt	1010 Pkt	40 Pkt	81 Pcnt
1765787545	14.18 Volt	1020 Pkt	40 Pkt	82 Pcnt
1765787544	14.18 Volt	1020 Pkt	40 Pkt	82 Pcnt
1765787244	14.18 Volt	1050 Pkt	50 Pkt	82 Pcnt
1765786945	14.1 Volt	1050 Pkt	50 Pkt	83 Pcnt
1765786944	14.1 Volt	1050 Pkt	50 Pkt	83 Pcnt
1765786644	14.18 Volt	1090 Pkt	50 Pkt	83 Pcnt
1765786345	14.18 Volt	1100 Pkt	50 Pkt	84 Pcnt
1765786344	14.18 Volt	1100 Pkt	50 Pkt	84 Pcnt
1765786044	14.18 Volt	1140 Pkt	50 Pkt	85 Pcnt
1765785745	14.18 Volt	1160 Pkt	50 Pkt	85 Pcnt
1765785744	14.18 Volt	1160 Pkt	50 Pkt	85 Pcnt
1765785444	14.18 Volt	1170 Pkt	50 Pkt	85 Pcnt
1765785144	14.18 Volt	1170 Pkt	50 Pkt	85 Pcnt
1765785144	14.18 Volt	1170 Pkt	50 Pkt	85 Pcnt
1765784844	14.18 Volt	1180 Pkt	50 Pkt	84 Pcnt
1765784544	14.18 Volt	1180 Pkt	50 Pkt	84 Pcnt
1765784544	14.18 Volt	1180 Pkt	50 Pkt	84 Pcnt
1765784244	14.18 Volt	1200 Pkt	60 Pkt	85 Pcnt
1765783947	14.18 Volt	1200 Pkt	60 Pkt	84 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)