OE3XXI Telemetry

This is the latest recevied telemetry packets stored in our database for station/object OE3XXI. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	UAkku*	TAkku*	VHeiz*	eff1H*
1788569011	13.35 Volt	24.5 Grad C	25 Grad C	97 %
1788568411	13.35 Volt	24.5 Grad C	25 Grad C	97 %
1788567811	13.35 Volt	24.5 Grad C	25 Grad C	98 %
1788567211	13.35 Volt	24 Grad C	25 Grad C	98 %
1788566611	13.35 Volt	24.5 Grad C	25 Grad C	98 %
1788566011	13.35 Volt	24.5 Grad C	25 Grad C	97 %
1788565411	13.35 Volt	25 Grad C	25 Grad C	97 %
1788564811	13.35 Volt	25 Grad C	25 Grad C	96 %
1788564211	13.35 Volt	25 Grad C	25 Grad C	96 %
1788563611	13.35 Volt	25 Grad C	25 Grad C	95 %
1788563011	13.35 Volt	24.5 Grad C	25 Grad C	94 %
1788562411	13.35 Volt	24.5 Grad C	25.5 Grad C	95 %
1788561811	13.35 Volt	24.5 Grad C	25.5 Grad C	96 %
1788561212	13.35 Volt	24.5 Grad C	25.5 Grad C	97 %
1788560611	13.35 Volt	25 Grad C	25.5 Grad C	97 %
1788560011	13.35 Volt	25 Grad C	25.5 Grad C	98 %
1788559412	13.35 Volt	25 Grad C	25.5 Grad C	99 %
1788558812	13.35 Volt	25 Grad C	25.5 Grad C	98 %
1788558213	13.35 Volt	25 Grad C	26 Grad C	98 %
1788557612	13.35 Volt	25.5 Grad C	26 Grad C	99 %
1788557012	13.35 Volt	25.5 Grad C	26 Grad C	99 %
1788556413	13.35 Volt	25.5 Grad C	26 Grad C	98 %
1788555812	13.35 Volt	25.5 Grad C	26 Grad C	98 %
1788555212	13.35 Volt	25.5 Grad C	26 Grad C	99 %
1788554613	13.35 Volt	25.5 Grad C	26.5 Grad C	98 %

*Used Equation Coefficients:

UAkku: 0, 0.075, 0

TAkku: 0, 0.5, -64

ISolar: 0, 0.061, 0

VHeiz: 0, 0.5, -64

eff1H: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)