IR3ZWY-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object IR3ZWY-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Rx10m*	Rx1h*	Dg10m*	DgR*	Eff*
1776636246	234 Pkt	1590 Pkt	1 Pkt	0.37 Pcnt	63 Pcnt
1776635945	254 Pkt	1580 Pkt	1 Pkt	0.37 Pcnt	63 Pcnt
1776635645	224 Pkt	1550 Pkt	0 Pkt	0.37 Pcnt	63 Pcnt
1776635345	216 Pkt	1550 Pkt	0 Pkt	0.37 Pcnt	63 Pcnt
1776635044	251 Pkt	1560 Pkt	0 Pkt	0.37 Pcnt	63 Pcnt
1776634744	229 Pkt	1540 Pkt	0 Pkt	0.37 Pcnt	63 Pcnt
1776634444	231 Pkt	1540 Pkt	0 Pkt	0.37 Pcnt	63 Pcnt
1776634144	269 Pkt	1530 Pkt	0 Pkt	0.37 Pcnt	63 Pcnt
1776633843	255 Pkt	1520 Pkt	0 Pkt	0.37 Pcnt	63 Pcnt
1776633543	239 Pkt	1500 Pkt	0 Pkt	0.37 Pcnt	63 Pcnt
1776633243	251 Pkt	1490 Pkt	0 Pkt	0.37 Pcnt	63 Pcnt
1776632942	222 Pkt	1470 Pkt	0 Pkt	0.37 Pcnt	63 Pcnt
1776632642	209 Pkt	1470 Pkt	1 Pkt	0.37 Pcnt	63 Pcnt
1776632342	232 Pkt	1470 Pkt	1 Pkt	0.37 Pcnt	63 Pcnt
1776632042	220 Pkt	1500 Pkt	0 Pkt	0.37 Pcnt	63 Pcnt
1776631741	210 Pkt	1490 Pkt	0 Pkt	0.37 Pcnt	63 Pcnt
1776631441	232 Pkt	1510 Pkt	0 Pkt	0.37 Pcnt	63 Pcnt
1776631141	219 Pkt	1510 Pkt	0 Pkt	0.37 Pcnt	63 Pcnt
1776630840	239 Pkt	1530 Pkt	1 Pkt	0.37 Pcnt	63 Pcnt
1776630540	242 Pkt	1550 Pkt	1 Pkt	0.37 Pcnt	63 Pcnt
1776630240	221 Pkt	1550 Pkt	0 Pkt	0.37 Pcnt	63 Pcnt
1776629939	221 Pkt	1570 Pkt	0 Pkt	0.37 Pcnt	63 Pcnt
1776629639	233 Pkt	1600 Pkt	0 Pkt	0.37 Pcnt	63 Pcnt
1776629339	222 Pkt	1610 Pkt	0 Pkt	0.37 Pcnt	63 Pcnt
1776629039	248 Pkt	1610 Pkt	0 Pkt	0.37 Pcnt	63 Pcnt

*Used Equation Coefficients:

Rx10m: 0, 1, 0

Rx1h: 0, 10, 0

Dg10m: 0, 1, 0

DgR: 0, 0.001, 0

Eff: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)