OE3PDB-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object OE3PDB-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Eff1h*	Rx10m*
1789963285	13.11 Volt	480 Pkt	88 Pcnt	104 Pkt
1789959685	13.11 Volt	490 Pkt	86 Pcnt	91 Pkt
1789956085	13.11 Volt	490 Pkt	86 Pcnt	100 Pkt
1789952486	13.11 Volt	460 Pkt	89 Pcnt	74 Pkt
1789945284	13.11 Volt	550 Pkt	85 Pcnt	104 Pkt
1789941685	13.11 Volt	580 Pkt	88 Pcnt	86 Pkt
1789938108	13.11 Volt	570 Pkt	87 Pcnt	114 Pkt
1789934485	13.11 Volt	680 Pkt	87 Pcnt	106 Pkt
1789930885	13.11 Volt	620 Pkt	85 Pcnt	124 Pkt
1789927285	13.11 Volt	620 Pkt	85 Pcnt	105 Pkt
1789923685	13.11 Volt	700 Pkt	86 Pcnt	122 Pkt
1789920085	13.11 Volt	800 Pkt	86 Pcnt	141 Pkt
1789916485	13.11 Volt	840 Pkt	82 Pcnt	177 Pkt
1789912885	13.11 Volt	800 Pkt	85 Pcnt	113 Pkt
1789909285	13.11 Volt	790 Pkt	84 Pcnt	138 Pkt
1789905686	13.11 Volt	640 Pkt	87 Pcnt	112 Pkt
1789902086	13.11 Volt	490 Pkt	82 Pcnt	72 Pkt
1789898486	13.11 Volt	660 Pkt	80 Pcnt	125 Pkt
1789894886	13.11 Volt	530 Pkt	73 Pcnt	123 Pkt
1789891286	13.11 Volt	710 Pkt	69 Pcnt	87 Pkt
1789887686	13.11 Volt	770 Pkt	75 Pcnt	157 Pkt
1789884086	13.11 Volt	690 Pkt	80 Pcnt	146 Pkt
1789880486	13.11 Volt	740 Pkt	88 Pcnt	101 Pkt
1789876887	13.11 Volt	670 Pkt	90 Pcnt	137 Pkt
1789873287	13.11 Volt	640 Pkt	87 Pcnt	122 Pkt

*Used Equation Coefficients:

Vin: 0, 0.079, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Rx10m: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)