IZ4GWE Telemetry

This is the latest recevied telemetry packets stored in our database for station/object IZ4GWE. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Rx10m*	Rx1h*	DgR*	Eff*
1784779755	154 Pkt	1030 Pkt	0.13 Pcnt	71 Pcnt
1784779455	163 Pkt	1060 Pkt	0.13 Pcnt	71 Pcnt
1784779155	171 Pkt	1080 Pkt	0.13 Pcnt	71 Pcnt
1784778855	150 Pkt	1090 Pkt	0.13 Pcnt	71 Pcnt
1784778554	151 Pkt	1070 Pkt	0.13 Pcnt	71 Pcnt
1784778254	158 Pkt	1090 Pkt	0.13 Pcnt	71 Pcnt
1784777954	150 Pkt	1080 Pkt	0.13 Pcnt	71 Pcnt
1784777653	164 Pkt	1110 Pkt	0.13 Pcnt	71 Pcnt
1784777353	172 Pkt	1120 Pkt	0.13 Pcnt	71 Pcnt
1784777053	185 Pkt	1120 Pkt	0.13 Pcnt	71 Pcnt
1784776753	173 Pkt	1110 Pkt	0.13 Pcnt	71 Pcnt
1784776452	186 Pkt	1120 Pkt	0.13 Pcnt	71 Pcnt
1784776152	192 Pkt	1080 Pkt	0.13 Pcnt	71 Pcnt
1784775852	189 Pkt	1070 Pkt	0.13 Pcnt	71 Pcnt
1784775551	161 Pkt	1090 Pkt	0.13 Pcnt	71 Pcnt
1784775251	143 Pkt	1060 Pkt	0.13 Pcnt	71 Pcnt
1784774951	171 Pkt	1080 Pkt	0.13 Pcnt	71 Pcnt
1784774651	177 Pkt	1080 Pkt	0.13 Pcnt	71 Pcnt
1784774350	181 Pkt	1060 Pkt	0.13 Pcnt	71 Pcnt
1784774050	182 Pkt	1080 Pkt	0.13 Pcnt	71 Pcnt
1784773750	161 Pkt	1090 Pkt	0.13 Pcnt	71 Pcnt
1784773449	166 Pkt	1100 Pkt	0.13 Pcnt	71 Pcnt
1784773149	165 Pkt	1140 Pkt	0.13 Pcnt	71 Pcnt
1784772849	146 Pkt	1150 Pkt	0.13 Pcnt	71 Pcnt
1784772549	193 Pkt	1180 Pkt	0.13 Pcnt	71 Pcnt

*Used Equation Coefficients:

Rx10m: 0, 1, 0

Rx1h: 0, 10, 0

Dg10m: 0, 1, 0

DgR: 0, 0.001, 0

Eff: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)