OE3BUB-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object OE3BUB-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Solar 2*	Temp In*	Rx1h*	Eff1h*
1784843263	13.8 Volt	25 C	510 Pkt	86 Pcnt
1784842963	13.8 Volt	25 C	490 Pkt	88 Pcnt
1784842663	13.8 Volt	25 C	490 Pkt	88 Pcnt
1784842363	13.8 Volt	25 C	470 Pkt	88 Pcnt
1784842063	13.8 Volt	25 C	470 Pkt	88 Pcnt
1784841763	13.8 Volt	25 C	490 Pkt	88 Pcnt
1784841463	13.8 Volt	25 C	490 Pkt	88 Pcnt
1784841163	13.8 Volt	25 C	490 Pkt	88 Pcnt
1784840863	13.8 Volt	25 C	500 Pkt	88 Pcnt
1784840563	13.8 Volt	25 C	510 Pkt	88 Pcnt
1784840263	13.8 Volt	25 C	510 Pkt	89 Pcnt
1784839963	13.8 Volt	25 C	510 Pkt	89 Pcnt
1784839663	13.8 Volt	25 C	510 Pkt	90 Pcnt
1784839363	13.8 Volt	25 C	520 Pkt	90 Pcnt
1784839064	13.8 Volt	25 C	520 Pkt	89 Pcnt
1784838763	13.8 Volt	25 C	520 Pkt	89 Pcnt
1784838463	13.8 Volt	25 C	520 Pkt	90 Pcnt
1784838163	13.8 Volt	25 C	540 Pkt	90 Pcnt
1784837863	13.8 Volt	25 C	540 Pkt	89 Pcnt
1784837563	13.8 Volt	25 C	560 Pkt	90 Pcnt
1784837263	13.8 Volt	25 C	540 Pkt	89 Pcnt
1784836963	13.8 Volt	25 C	540 Pkt	88 Pcnt
1784836664	13.8 Volt	25 C	540 Pkt	89 Pcnt
1784836363	13.8 Volt	25 C	540 Pkt	89 Pcnt
1784836063	13.8 Volt	25 C	530 Pkt	88 Pcnt

*Used Equation Coefficients:

Solar 2: 0, 0.075, 0

Temp In: 0, 0.5, -64

Rx1h: 0, 10, 0

Eff1h: 0, 1, 0

AMD: 0, 0.5, -64

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)