DM2OV-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object DM2OV-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Temp*	Humi*	Baro*
1781534360	17.6 deg C	62.9 %	1013.6 hPa
1781533464	17.8 deg C	63.2 %	1013.7 hPa
1781532564	17.6 deg C	64.1 %	1013.7 hPa
1781531665	17.9 deg C	62.7 %	1013.7 hPa
1781528072	16.1 deg C	66.7 %	1013.8 hPa
1781524481	15.2 deg C	68.2 %	1014 hPa
1781523585	15.2 deg C	68.3 %	1014 hPa
1781521788	15.3 deg C	66.5 %	1013.9 hPa
1781520891	15.2 deg C	66.6 %	1013.9 hPa
1781517285	14.7 deg C	67.6 %	1013.6 hPa
1781515494	14.6 deg C	67.5 %	1013.5 hPa
1781510982	14.4 deg C	69.6 %	1013.4 hPa
1781505584	13.4 deg C	75.7 %	1013.1 hPa
1781504687	12.9 deg C	76.5 %	1013.2 hPa
1781503784	12.9 deg C	76.8 %	1013.1 hPa
1781498415	11.5 deg C	81.8 %	1012.9 hPa
1781490293	11.5 deg C	82.1 %	1012.3 hPa
1781489390	11.3 deg C	81.6 %	1012.5 hPa
1781488494	11.5 deg C	80.3 %	1012.4 hPa
1781474103	13.2 deg C	77.6 %	1012.9 hPa
1781473194	14 deg C	74.9 %	1012.9 hPa
1781472297	14.1 deg C	74.6 %	1012.8 hPa
1781471400	14.2 deg C	75 %	1012.8 hPa
1781470500	14.2 deg C	75.2 %	1013 hPa
1781457006	17.4 deg C	65.8 %	1012.2 hPa

*Used Equation Coefficients:

Temp: 0, 0.1, 0

Humi: 0, 0.1, 0

Baro: 0, 0.1, 0

Value4: 0, 1, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)