TA6B-11 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object TA6B-11. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxTraffic*	TxTraffic*	RxDrop*	RSSI*	Voltage*
1776707432	39 Pkt	6 Pkt	4 Pkt	-58 dBm	13.68 V
1776707107	50 Pkt	2 Pkt	1 Pkt	-60 dBm	14.48 V
1776706781	51 Pkt	3 Pkt	1 Pkt	-61 dBm	14.48 V
1776706455	41 Pkt	6 Pkt	4 Pkt	-61 dBm	14.52 V
1776706130	62 Pkt	1 Pkt	2 Pkt	-61 dBm	14.52 V
1776705804	50 Pkt	3 Pkt	1 Pkt	-59 dBm	14.48 V
1776705479	37 Pkt	6 Pkt	3 Pkt	-64 dBm	14.48 V
1776705153	49 Pkt	1 Pkt	3 Pkt	-60 dBm	14.48 V
1776704828	34 Pkt	7 Pkt	4 Pkt	-62 dBm	14.48 V
1776704503	34 Pkt	2 Pkt	2 Pkt	-62 dBm	14.52 V
1776704176	58 Pkt	2 Pkt	2 Pkt	-59 dBm	14.52 V
1776703850	34 Pkt	5 Pkt	3 Pkt	-60 dBm	14.48 V
1776703525	33 Pkt	2 Pkt	2 Pkt	-57 dBm	14.52 V
1776703200	66 Pkt	2 Pkt	3 Pkt	-59 dBm	14.46 V
1776702873	10 Pkt	0 Pkt	1 Pkt	-59 dBm	14.52 V
1776702486	49 Pkt	1 Pkt	4 Pkt	-61 dBm	14.52 V
1776702162	45 Pkt	2 Pkt	3 Pkt	-62 dBm	14.52 V
1776701837	33 Pkt	8 Pkt	2 Pkt	-61 dBm	14.54 V
1776701511	42 Pkt	1 Pkt	3 Pkt	-64 dBm	14.52 V
1776701185	35 Pkt	2 Pkt	2 Pkt	-63 dBm	14.52 V
1776700858	30 Pkt	7 Pkt	8 Pkt	-59 dBm	14.52 V
1776700534	38 Pkt	1 Pkt	2 Pkt	-59 dBm	14.52 V
1776700209	33 Pkt	3 Pkt	2 Pkt	-62 dBm	14.52 V
1776699885	40 Pkt	5 Pkt	7 Pkt	-62 dBm	14.52 V
1776699558	43 Pkt	2 Pkt	5 Pkt	-60 dBm	14.52 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)