VA2RVO-3 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object VA2RVO-3. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Avg 10m*	Avg 10m*	RxPkts*	IGateDropRx*	TxPkts*
1754062735	0.14 Rx Erlang	0.01 Tx Erlang	158 count/10m	24 count/10m	4 count/10m
1754061560	0.18 Rx Erlang	0.01 Tx Erlang	169 count/10m	29 count/10m	4 count/10m
1754060352	0.12 Rx Erlang	0.01 Tx Erlang	117 count/10m	12 count/10m	4 count/10m
1754059145	0.15 Rx Erlang	0 Tx Erlang	134 count/10m	49 count/10m	1 count/10m
1754057960	0.15 Rx Erlang	0.01 Tx Erlang	135 count/10m	49 count/10m	5 count/10m
1754055535	0.12 Rx Erlang	0 Tx Erlang	110 count/10m	9 count/10m	3 count/10m
1754054373	0.11 Rx Erlang	0.01 Tx Erlang	102 count/10m	8 count/10m	3 count/10m
1754053174	0.13 Rx Erlang	0 Tx Erlang	126 count/10m	2 count/10m	3 count/10m
1754051977	0.12 Rx Erlang	0 Tx Erlang	124 count/10m	4 count/10m	1 count/10m
1754043575	0.13 Rx Erlang	0.01 Tx Erlang	116 count/10m	0 count/10m	5 count/10m
1754042377	0.1 Rx Erlang	0.01 Tx Erlang	94 count/10m	4 count/10m	3 count/10m
1754041159	0.07 Rx Erlang	0.01 Tx Erlang	63 count/10m	1 count/10m	2 count/10m
1754039950	0.1 Rx Erlang	0.01 Tx Erlang	72 count/10m	1 count/10m	5 count/10m
1754038754	0.08 Rx Erlang	0 Tx Erlang	73 count/10m	2 count/10m	4 count/10m
1754035135	0.07 Rx Erlang	0 Tx Erlang	72 count/10m	0 count/10m	4 count/10m
1754033935	0.07 Rx Erlang	0 Tx Erlang	66 count/10m	0 count/10m	2 count/10m
1754032736	0.1 Rx Erlang	0.01 Tx Erlang	81 count/10m	1 count/10m	4 count/10m
1754031535	0.08 Rx Erlang	0 Tx Erlang	77 count/10m	1 count/10m	3 count/10m
1754030335	0.08 Rx Erlang	0 Tx Erlang	62 count/10m	0 count/10m	2 count/10m
1754029135	0.1 Rx Erlang	0.01 Tx Erlang	86 count/10m	0 count/10m	3 count/10m
1754027935	0.1 Rx Erlang	0 Tx Erlang	81 count/10m	1 count/10m	2 count/10m
1754026735	0.1 Rx Erlang	0 Tx Erlang	92 count/10m	1 count/10m	1 count/10m
1754025535	0.13 Rx Erlang	0.01 Tx Erlang	93 count/10m	1 count/10m	5 count/10m
1754024335	0.08 Rx Erlang	0.01 Tx Erlang	70 count/10m	0 count/10m	4 count/10m
1754023135	0.07 Rx Erlang	0.01 Tx Erlang	62 count/10m	1 count/10m	3 count/10m

*Used Equation Coefficients:

Avg 10m: 0, 0.005, 0

RxPkts: 0, 1, 0

IGateDropRx: 0, 1, 0

TxPkts: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)