9A4QV-4 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object 9A4QV-4. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 >>

Time	Vin*	Rx1h*	Eff1h*	Temp*
1757450587	12.9 Volt	1630 Pkt	66 Pcnt	22.82 C°
1757450572	12.9 Volt	1630 Pkt	66 Pcnt	22.82 C°
1757446972	12.98 Volt	1790 Pkt	70 Pcnt	23.25 C°
1757446709	12.98 Volt	1800 Pkt	70 Pcnt	23.25 C°
1757445172	12.98 Volt	1790 Pkt	67 Pcnt	23.39 C°
1757443372	12.98 Volt	1630 Pkt	64 Pcnt	23.39 C°
1757442813	12.98 Volt	1590 Pkt	63 Pcnt	23.39 C°
1757441572	12.98 Volt	1680 Pkt	65 Pcnt	23.54 C°
1757439772	12.98 Volt	1780 Pkt	65 Pcnt	23.39 C°
1757438915	13.05 Volt	1800 Pkt	67 Pcnt	23.54 C°
1757437972	13.05 Volt	1750 Pkt	66 Pcnt	23.54 C°
1757436172	13.05 Volt	1740 Pkt	69 Pcnt	23.54 C°
1757435919	13.05 Volt	1710 Pkt	69 Pcnt	23.54 C°
1757434372	13.05 Volt	1720 Pkt	70 Pcnt	23.54 C°
1757432572	13.2 Volt	1710 Pkt	69 Pcnt	23.54 C°
1757431156	13.95 Volt	1690 Pkt	72 Pcnt	23.68 C°
1757430772	13.43 Volt	1690 Pkt	72 Pcnt	23.68 C°
1757428972	13.58 Volt	1660 Pkt	71 Pcnt	23.97 C°
1757427358	13.58 Volt	1650 Pkt	70 Pcnt	24.4 C°
1757427172	13.58 Volt	1650 Pkt	70 Pcnt	24.4 C°
1757425373	13.65 Volt	1640 Pkt	70 Pcnt	24.4 C°
1757423749	13.65 Volt	1640 Pkt	70 Pcnt	24.26 C°
1757423573	13.58 Volt	1640 Pkt	70 Pcnt	24.69 C°
1757421773	13.73 Volt	1570 Pkt	70 Pcnt	24.4 C°
1757421626	13.88 Volt	1570 Pkt	70 Pcnt	24.4 C°

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Temp: 0, 0.1444, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)