DB0GER Telemetry

This is the latest recevied telemetry packets stored in our database for station/object DB0GER. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Avg 10m*	Avg 10m*	RxPkts*	IGateDropRx*	TxPkts*
1780583939	0.08 Rx Erlang	0.03 Tx Erlang	84 count/10m	3 count/10m	29 count/10m
1780582739	0.06 Rx Erlang	0.03 Tx Erlang	64 count/10m	3 count/10m	25 count/10m
1780581539	0.07 Rx Erlang	0.03 Tx Erlang	67 count/10m	13 count/10m	23 count/10m
1780580339	0.09 Rx Erlang	0.03 Tx Erlang	75 count/10m	5 count/10m	25 count/10m
1780579139	0.09 Rx Erlang	0.03 Tx Erlang	81 count/10m	2 count/10m	30 count/10m
1780577939	0.09 Rx Erlang	0.04 Tx Erlang	90 count/10m	3 count/10m	31 count/10m
1780576739	0.06 Rx Erlang	0.03 Tx Erlang	58 count/10m	1 count/10m	25 count/10m
1780575539	0.09 Rx Erlang	0.03 Tx Erlang	84 count/10m	4 count/10m	29 count/10m
1780574339	0.07 Rx Erlang	0.03 Tx Erlang	69 count/10m	2 count/10m	26 count/10m
1780573139	0.07 Rx Erlang	0.03 Tx Erlang	64 count/10m	2 count/10m	25 count/10m
1780571939	0.06 Rx Erlang	0.03 Tx Erlang	64 count/10m	2 count/10m	28 count/10m
1780570739	0.08 Rx Erlang	0.04 Tx Erlang	73 count/10m	1 count/10m	33 count/10m
1780569539	0.07 Rx Erlang	0.03 Tx Erlang	67 count/10m	0 count/10m	28 count/10m
1780568339	0.06 Rx Erlang	0.03 Tx Erlang	60 count/10m	3 count/10m	24 count/10m
1780567139	0.06 Rx Erlang	0.02 Tx Erlang	60 count/10m	1 count/10m	22 count/10m
1780565939	0.07 Rx Erlang	0.03 Tx Erlang	64 count/10m	0 count/10m	29 count/10m
1780564739	0.08 Rx Erlang	0.03 Tx Erlang	76 count/10m	1 count/10m	32 count/10m
1780563539	0.07 Rx Erlang	0.02 Tx Erlang	66 count/10m	1 count/10m	23 count/10m
1780562339	0.07 Rx Erlang	0.03 Tx Erlang	65 count/10m	1 count/10m	29 count/10m
1780561139	0.09 Rx Erlang	0.03 Tx Erlang	78 count/10m	4 count/10m	32 count/10m
1780559939	0.07 Rx Erlang	0.03 Tx Erlang	81 count/10m	1 count/10m	34 count/10m
1780558739	0.07 Rx Erlang	0.02 Tx Erlang	71 count/10m	4 count/10m	23 count/10m
1780557539	0.08 Rx Erlang	0.03 Tx Erlang	79 count/10m	3 count/10m	25 count/10m
1780556339	0.09 Rx Erlang	0.03 Tx Erlang	78 count/10m	2 count/10m	24 count/10m
1780555139	0.06 Rx Erlang	0.02 Tx Erlang	60 count/10m	1 count/10m	22 count/10m

*Used Equation Coefficients:

Avg 10m: 0, 0.005, 0

RxPkts: 0, 1, 0

IGateDropRx: 0, 1, 0

TxPkts: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)