HG5PBP-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object HG5PBP-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1784695803	13.88 Volt	430 Pkt	50 Pkt	77 Pcnt
1784695504	13.88 Volt	420 Pkt	50 Pkt	78 Pcnt
1784695503	13.88 Volt	420 Pkt	50 Pkt	78 Pcnt
1784695203	13.88 Volt	420 Pkt	50 Pkt	78 Pcnt
1784694905	13.88 Volt	410 Pkt	50 Pkt	80 Pcnt
1784694903	13.88 Volt	410 Pkt	50 Pkt	80 Pcnt
1784694603	13.88 Volt	400 Pkt	40 Pkt	80 Pcnt
1784694304	13.88 Volt	400 Pkt	30 Pkt	80 Pcnt
1784694303	13.88 Volt	400 Pkt	30 Pkt	80 Pcnt
1784694003	13.88 Volt	390 Pkt	30 Pkt	81 Pcnt
1784693704	13.88 Volt	390 Pkt	30 Pkt	81 Pcnt
1784693703	13.88 Volt	390 Pkt	30 Pkt	81 Pcnt
1784693403	13.88 Volt	400 Pkt	30 Pkt	81 Pcnt
1784693105	13.88 Volt	400 Pkt	30 Pkt	82 Pcnt
1784693103	13.88 Volt	400 Pkt	30 Pkt	82 Pcnt
1784692803	13.88 Volt	430 Pkt	30 Pkt	82 Pcnt
1784692505	13.88 Volt	430 Pkt	30 Pkt	82 Pcnt
1784692503	13.88 Volt	430 Pkt	30 Pkt	82 Pcnt
1784692203	13.88 Volt	440 Pkt	30 Pkt	82 Pcnt
1784691904	13.88 Volt	470 Pkt	40 Pkt	84 Pcnt
1784691903	13.88 Volt	470 Pkt	40 Pkt	84 Pcnt
1784691603	13.88 Volt	470 Pkt	40 Pkt	85 Pcnt
1784691305	13.88 Volt	470 Pkt	40 Pkt	85 Pcnt
1784691303	13.88 Volt	470 Pkt	40 Pkt	85 Pcnt
1784691004	13.88 Volt	490 Pkt	40 Pkt	87 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)