DD3FC-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object DD3FC-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1784688614	9.9 Volt	20 Pkt	10 Pkt	15 Pcnt
1784688611	9.9 Volt	20 Pkt	10 Pkt	15 Pcnt
1784688011	9.9 Volt	20 Pkt	10 Pkt	15 Pcnt
1784687413	9.9 Volt	30 Pkt	10 Pkt	16 Pcnt
1784687411	9.9 Volt	30 Pkt	10 Pkt	16 Pcnt
1784686814	9.9 Volt	30 Pkt	20 Pkt	18 Pcnt
1784686813	9.9 Volt	30 Pkt	20 Pkt	18 Pcnt
1784686214	9.9 Volt	20 Pkt	20 Pkt	17 Pcnt
1784686212	9.9 Volt	20 Pkt	20 Pkt	17 Pcnt
1784685612	9.9 Volt	30 Pkt	20 Pkt	18 Pcnt
1784685015	9.9 Volt	30 Pkt	20 Pkt	21 Pcnt
1784685012	9.9 Volt	30 Pkt	20 Pkt	21 Pcnt
1784684414	9.9 Volt	30 Pkt	20 Pkt	22 Pcnt
1784684412	9.9 Volt	30 Pkt	20 Pkt	22 Pcnt
1784683814	9.9 Volt	40 Pkt	20 Pkt	29 Pcnt
1784683812	9.9 Volt	40 Pkt	20 Pkt	29 Pcnt
1784683214	9.9 Volt	50 Pkt	30 Pkt	34 Pcnt
1784683212	9.9 Volt	50 Pkt	30 Pkt	34 Pcnt
1784682614	9.9 Volt	70 Pkt	30 Pkt	44 Pcnt
1784682612	9.9 Volt	70 Pkt	30 Pkt	44 Pcnt
1784682012	9.9 Volt	80 Pkt	40 Pkt	54 Pcnt
1784681412	9.9 Volt	100 Pkt	50 Pkt	61 Pcnt
1784680814	9.9 Volt	110 Pkt	50 Pkt	71 Pcnt
1784680812	9.9 Volt	110 Pkt	50 Pkt	71 Pcnt
1784680214	9.9 Volt	120 Pkt	50 Pkt	74 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)