OK1JRA-17 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object OK1JRA-17. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxPkts*	RF->Inet*	DX_dist.*	live*	Temp_core*
1755759990	9 Pkts	0 Pkts	14 km	2 min.	63.89 C
1755759990	9 Pkts	0 Pkts	14 km	2 min.	63.89 C
1755759089	35 Pkts	0 Pkts	14 km	1 min.	63.89 C
1755758191	25 Pkts	0 Pkts	15 km	0 min.	63.89 C
1755758188	25 Pkts	0 Pkts	15 km	0 min.	63.89 C
1755758188	25 Pkts	0 Pkts	15 km	0 min.	63.89 C
1755757287	8 Pkts	0 Pkts	51 km	95 min.	63.33 C
1755757287	8 Pkts	0 Pkts	51 km	95 min.	63.33 C
1755756389	-	-	-	-	-
1755756386	14 Pkts	0 Pkts	14 km	94 min.	62.78 C
1755755485	20 Pkts	0 Pkts	14 km	93 min.	62.22 C
1755755485	20 Pkts	0 Pkts	14 km	93 min.	62.22 C
1755754585	34 Pkts	0 Pkts	12 km	92 min.	61.67 C
1755754585	34 Pkts	0 Pkts	12 km	92 min.	61.67 C
1755753682	49 Pkts	0 Pkts	51 km	91 min.	62.78 C
1755753682	49 Pkts	0 Pkts	51 km	91 min.	62.78 C
1755752781	13 Pkts	0 Pkts	51 km	90 min.	61.67 C
1755752781	13 Pkts	0 Pkts	51 km	90 min.	61.67 C
1755751880	10 Pkts	0 Pkts	4 km	89 min.	61.67 C
1755751880	10 Pkts	0 Pkts	4 km	89 min.	61.67 C
1755750979	7 Pkts	0 Pkts	0 km	88 min.	62.22 C
1755750979	7 Pkts	0 Pkts	0 km	0 min.	62.22 C
1755750979	7 Pkts	0 Pkts	0 km	88 min.	62.22 C
1755750078	10 Pkts	0 Pkts	0 km	87 min.	61.67 C
1755750078	10 Pkts	0 Pkts	0 km	87 min.	61.67 C

*Used Equation Coefficients:

RxPkts: 0, 1, 0

RF->Inet: 0, 1, 0

DX_dist.: 0, 1, 0

live: 0, 1, 0

Temp_core: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)