LZ0IVA Telemetry

This is the latest recevied telemetry packets stored in our database for station/object LZ0IVA. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1777075061	12.23 Volt	60 Pkt	40 Pkt	59 Pcnt
1777073261	12.23 Volt	70 Pkt	50 Pkt	66 Pcnt
1777071461	12.23 Volt	70 Pkt	50 Pkt	66 Pcnt
1777069661	12.23 Volt	60 Pkt	40 Pkt	60 Pcnt
1777067861	12.23 Volt	70 Pkt	40 Pkt	63 Pcnt
1777066061	12.23 Volt	60 Pkt	40 Pkt	65 Pcnt
1777064261	12.23 Volt	60 Pkt	40 Pkt	65 Pcnt
1777062461	12.23 Volt	60 Pkt	40 Pkt	69 Pcnt
1777060661	12.23 Volt	70 Pkt	50 Pkt	68 Pcnt
1777058861	12.23 Volt	70 Pkt	50 Pkt	61 Pcnt
1777057061	12.23 Volt	70 Pkt	50 Pkt	70 Pcnt
1777055261	12.23 Volt	70 Pkt	50 Pkt	77 Pcnt
1777053461	12.23 Volt	60 Pkt	40 Pkt	76 Pcnt
1777051661	12.23 Volt	50 Pkt	40 Pkt	78 Pcnt
1777049862	12.23 Volt	60 Pkt	40 Pkt	86 Pcnt
1777048062	12.23 Volt	60 Pkt	40 Pkt	91 Pcnt
1777046262	12.23 Volt	60 Pkt	40 Pkt	81 Pcnt
1777044462	12.23 Volt	50 Pkt	40 Pkt	77 Pcnt
1777042662	12.23 Volt	30 Pkt	20 Pkt	55 Pcnt
1777040862	12.23 Volt	10 Pkt	0 Pkt	20 Pcnt
1777039062	12.23 Volt	0 Pkt	0 Pkt	10 Pcnt
1777037262	12.23 Volt	10 Pkt	0 Pkt	14 Pcnt
1777035462	12.23 Volt	10 Pkt	0 Pkt	14 Pcnt
1777033662	12.23 Volt	10 Pkt	0 Pkt	22 Pcnt
1777031862	12.23 Volt	0 Pkt	0 Pkt	15 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)