SV3GCB-11 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SV3GCB-11. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

Time	Vin*	Rx1h*	Dg1h*	Eff1h*	Eff*
1761813314	12.68 Volt	360 Pkt	80 Pkt	78 Pcnt	78 Pcnt
1761748775	12.45 Volt	450 Pkt	120 Pkt	90 Pcnt	94 Pcnt
1761736103	13.88 Volt	350 Pkt	90 Pkt	94 Pcnt	94 Pcnt
1761727034	14.1 Volt	340 Pkt	70 Pkt	95 Pcnt	95 Pcnt
1761652755	14.25 Volt	400 Pkt	100 Pkt	91 Pcnt	91 Pcnt
1761570682	12.53 Volt	520 Pkt	160 Pkt	88 Pcnt	90 Pcnt
1761561613	12.9 Volt	640 Pkt	170 Pkt	92 Pcnt	92 Pcnt
1761489532	12.75 Volt	400 Pkt	100 Pkt	83 Pcnt	77 Pcnt
1761476867	14.25 Volt	410 Pkt	110 Pkt	84 Pcnt	72 Pcnt
1761467791	14.1 Volt	640 Pkt	160 Pkt	69 Pcnt	70 Pcnt
1761400727	12.83 Volt	450 Pkt	110 Pkt	92 Pcnt	93 Pcnt
1761388058	14.18 Volt	550 Pkt	170 Pkt	94 Pcnt	94 Pcnt
1761378987	13.35 Volt	430 Pkt	110 Pkt	96 Pcnt	96 Pcnt
1761311412	13.05 Volt	560 Pkt	140 Pkt	94 Pcnt	94 Pcnt
1761154132	12.23 Volt	330 Pkt	90 Pkt	91 Pcnt	91 Pcnt
1761141460	12.9 Volt	280 Pkt	100 Pkt	88 Pcnt	92 Pcnt
1761128788	14.25 Volt	220 Pkt	70 Pkt	94 Pcnt	94 Pcnt
1761119719	13.2 Volt	270 Pkt	70 Pkt	94 Pcnt	94 Pcnt
1761067941	12.45 Volt	250 Pkt	70 Pkt	94 Pcnt	93 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Eff: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)