SP9KN-3 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SP9KN-3. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 >>

Time	Rx per 10 mins*	TX per 10 mins*	Temperature 1*	Temperature 2*
1750516228	129 count/10m	5 count/10m	-0.24 C	-0.24 C
1750515622	118 count/10m	3 count/10m	-0.24 C	-0.24 C
1750515016	123 count/10m	4 count/10m	-0.24 C	-0.24 C
1750514410	159 count/10m	5 count/10m	-0.24 C	-0.24 C
1750513198	133 count/10m	8 count/10m	-0.24 C	-0.24 C
1750512592	116 count/10m	5 count/10m	-0.24 C	-0.24 C
1750511986	100 count/10m	3 count/10m	-0.24 C	-0.24 C
1750511380	103 count/10m	5 count/10m	-0.24 C	-0.24 C
1750510774	128 count/10m	5 count/10m	-0.24 C	-0.24 C
1750510168	125 count/10m	5 count/10m	-0.24 C	-0.24 C
1750509562	131 count/10m	7 count/10m	-0.24 C	-0.24 C
1750508956	124 count/10m	3 count/10m	-0.24 C	-0.24 C
1750508350	118 count/10m	7 count/10m	-0.24 C	-0.24 C
1750507744	159 count/10m	5 count/10m	-0.24 C	-0.24 C
1750506532	109 count/10m	1 count/10m	-0.24 C	-0.24 C
1750505926	128 count/10m	5 count/10m	-0.24 C	-0.24 C
1750505320	107 count/10m	6 count/10m	-0.24 C	-0.24 C
1750504714	151 count/10m	9 count/10m	-0.24 C	-0.24 C
1750432963	106 count/10m	4 count/10m	-0.24 C	-0.24 C
1750432228	91 count/10m	5 count/10m	-0.24 C	-0.24 C
1750431622	126 count/10m	4 count/10m	-0.24 C	-0.24 C
1750431016	103 count/10m	1 count/10m	-0.24 C	-0.24 C
1750430410	147 count/10m	5 count/10m	-0.24 C	-0.24 C
1750429804	150 count/10m	3 count/10m	-0.24 C	-0.24 C
1750429198	137 count/10m	3 count/10m	-0.24 C	-0.24 C

*Used Equation Coefficients:

Voltage: 0, 0.008, 0

Rx per 10 mins: 0, 1, 0

TX per 10 mins: 0, 1, 0

Temperature 1: 0, 0.72, -60

Temperature 2: 0, 0.72, -60

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)