DF8WO-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object DF8WO-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	Vin*	A2*	Temp*	A4*	A5*
1784666591	14.03 Volt	0 None	0 C	0 None	0 None
1784662989	14.03 Volt	0 None	0 C	0 None	0 None
1784661189	14.1 Volt	0 None	0 C	0 None	0 None
1784659389	14.1 Volt	0 None	0 C	0 None	0 None
1784657590	13.95 Volt	0 None	0 C	0 None	0 None
1784655801	13.95 Volt	0 None	0 C	0 None	0 None
1784653990	14.03 Volt	0 None	0 C	0 None	0 None
1784652190	14.1 Volt	0 None	0 C	0 None	0 None
1784650390	13.95 Volt	0 None	0 C	0 None	0 None
1784644990	14.18 Volt	0 None	0 C	0 None	0 None
1784643191	14.18 Volt	0 None	0 C	0 None	0 None
1784641392	14.03 Volt	0 None	0 C	0 None	0 None
1784637790	14.1 Volt	0 None	0 C	0 None	0 None
1784634193	14.1 Volt	0 None	0 C	0 None	0 None
1784632393	14.03 Volt	0 None	0 C	0 None	0 None
1784630591	14.1 Volt	0 None	0 C	0 None	0 None
1784628790	14.18 Volt	0 None	0 C	0 None	0 None
1784626995	13.95 Volt	0 None	0 C	0 None	0 None
1784625192	14.1 Volt	0 None	0 C	0 None	0 None
1784621591	14.1 Volt	0 None	0 C	0 None	0 None
1784619792	14.03 Volt	0 None	0 C	0 None	0 None
1784617991	14.1 Volt	0 None	0 C	0 None	0 None
1784616191	14.1 Volt	0 None	0 C	0 None	0 None
1784614391	14.03 Volt	0 None	0 C	0 None	0 None
1784612592	14.1 Volt	0 None	0 C	0 None	0 None

*Used Equation Coefficients:

Vin: 0, 0.075, 0

A2: 0, 0, 0

Temp: 0, 0.5, -64

A4: 0, 0, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)