ER-F5OVZ Telemetry

This is the latest recevied telemetry packets stored in our database for station/object ER-F5OVZ. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	Value1*	Value2*	Value3*	Value4*
1780157562	0 RX Erlang	0 TX Erlang	0 RXcount/10m	0 TXcount/10m
1780156962	0 RX Erlang	0.16 TX Erlang	0 RXcount/10m	4 TXcount/10m
1780156362	0 RX Erlang	0.25 TX Erlang	0 RXcount/10m	10 TXcount/10m
1780155762	0 RX Erlang	0.05 TX Erlang	0 RXcount/10m	10 TXcount/10m
1780155162	0 RX Erlang	0.01 TX Erlang	0 RXcount/10m	2 TXcount/10m
1780154029	0 RX Erlang	0 TX Erlang	0 RXcount/10m	1 TXcount/10m
1780153429	0 RX Erlang	0.03 TX Erlang	0 RXcount/10m	3 TXcount/10m
1780152829	0 RX Erlang	0.13 TX Erlang	0 RXcount/10m	5 TXcount/10m
1780152229	0 RX Erlang	0.77 TX Erlang	0 RXcount/10m	27 TXcount/10m
1780151629	0 RX Erlang	0.78 TX Erlang	0 RXcount/10m	29 TXcount/10m
1780149857	0.22 RX Erlang	0.34 TX Erlang	6 RXcount/10m	16 TXcount/10m
1780148825	0 RX Erlang	0.03 TX Erlang	0 RXcount/10m	5 TXcount/10m
1780148225	0.02 RX Erlang	0.04 TX Erlang	2 RXcount/10m	7 TXcount/10m
1780147625	0 RX Erlang	0.02 TX Erlang	0 RXcount/10m	4 TXcount/10m
1780147025	0 RX Erlang	0 TX Erlang	0 RXcount/10m	0 TXcount/10m
1780146425	0 RX Erlang	0.03 TX Erlang	0 RXcount/10m	5 TXcount/10m
1780145825	0 RX Erlang	0.01 TX Erlang	0 RXcount/10m	2 TXcount/10m
1780145225	0 RX Erlang	0.02 TX Erlang	0 RXcount/10m	3 TXcount/10m
1780144625	0 RX Erlang	0.03 TX Erlang	0 RXcount/10m	6 TXcount/10m
1780144025	0.13 RX Erlang	0.36 TX Erlang	4 RXcount/10m	14 TXcount/10m
1780143425	0 RX Erlang	0.01 TX Erlang	0 RXcount/10m	2 TXcount/10m
1780142825	0 RX Erlang	0.02 TX Erlang	0 RXcount/10m	1 TXcount/10m
1780142225	0 RX Erlang	0 TX Erlang	0 RXcount/10m	0 TXcount/10m
1780141626	0 RX Erlang	0.01 TX Erlang	0 RXcount/10m	1 TXcount/10m
1780141026	0 RX Erlang	0.02 TX Erlang	0 RXcount/10m	4 TXcount/10m

*Used Equation Coefficients:

Value1: 0, 1, 0

Value2: 0, 1, 0

Value3: 0, 1, 0

Value4: 0, 1, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)