W9II-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object W9II-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*	Temp*
1776704908	14.85 Volt	20 Pkt	10 Pkt	31 Pcnt	92.3 F
1776704608	14.7 Volt	20 Pkt	0 Pkt	27 Pcnt	91.4 F
1776704308	15.23 Volt	20 Pkt	0 Pkt	28 Pcnt	91.4 F
1776704010	14.85 Volt	20 Pkt	0 Pkt	28 Pcnt	92.3 F
1776704008	14.85 Volt	20 Pkt	0 Pkt	28 Pcnt	92.3 F
1776703708	15 Volt	20 Pkt	0 Pkt	31 Pcnt	92.3 F
1776703410	15.08 Volt	20 Pkt	0 Pkt	28 Pcnt	92.3 F
1776703408	15.08 Volt	20 Pkt	0 Pkt	28 Pcnt	92.3 F
1776703108	14.93 Volt	20 Pkt	0 Pkt	30 Pcnt	90.5 F
1776702810	15 Volt	10 Pkt	0 Pkt	26 Pcnt	91.4 F
1776702808	15 Volt	10 Pkt	0 Pkt	26 Pcnt	91.4 F
1776702508	15 Volt	20 Pkt	0 Pkt	29 Pcnt	91.4 F
1776702210	14.78 Volt	20 Pkt	0 Pkt	30 Pcnt	91.4 F
1776702208	14.78 Volt	20 Pkt	0 Pkt	30 Pcnt	91.4 F
1776701908	15 Volt	20 Pkt	0 Pkt	33 Pcnt	91.4 F
1776701610	14.7 Volt	20 Pkt	0 Pkt	35 Pcnt	90.5 F
1776701608	14.7 Volt	20 Pkt	0 Pkt	35 Pcnt	90.5 F
1776701308	14.85 Volt	20 Pkt	10 Pkt	38 Pcnt	91.4 F
1776701010	15.08 Volt	20 Pkt	10 Pkt	37 Pcnt	91.4 F
1776701008	15.08 Volt	20 Pkt	10 Pkt	37 Pcnt	91.4 F
1776700708	14.85 Volt	20 Pkt	0 Pkt	36 Pcnt	90.5 F
1776700410	14.7 Volt	20 Pkt	0 Pkt	32 Pcnt	89.6 F
1776700408	14.7 Volt	20 Pkt	0 Pkt	32 Pcnt	89.6 F
1776700108	14.93 Volt	20 Pkt	10 Pkt	35 Pcnt	89.6 F
1776699809	14.63 Volt	20 Pkt	10 Pkt	31 Pcnt	90.5 F

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Temp: 0, 0.9, -83.2

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)