Overview Statistics Trail Chart Weather Telemetry Raw packets
 

This is the latest recevied telemetry packets stored in our database for station/object IN3IZL-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>
Time Vin* Rx1h* Dg1h* Eff1h* A5*
1784694800 13.8 Volt 0 Pkt 0 Pkt 100 Pcnt 0 None
1784694500 13.8 Volt 0 Pkt 0 Pkt 100 Pcnt 0 None
1784694200 13.8 Volt 0 Pkt 0 Pkt 100 Pcnt 0 None
1784693900 13.8 Volt 0 Pkt 0 Pkt 100 Pcnt 0 None
1784693600 13.8 Volt 0 Pkt 0 Pkt 100 Pcnt 0 None
1784693300 13.8 Volt 0 Pkt 0 Pkt 100 Pcnt 0 None
1784693000 13.8 Volt 0 Pkt 0 Pkt 100 Pcnt 0 None
1784692700 13.8 Volt 0 Pkt 0 Pkt 100 Pcnt 0 None
1784692400 13.8 Volt 0 Pkt 0 Pkt 100 Pcnt 0 None
1784692100 13.8 Volt 0 Pkt 0 Pkt 100 Pcnt 0 None
1784691800 13.8 Volt 0 Pkt 0 Pkt 100 Pcnt 0 None
1784691501 13.8 Volt 0 Pkt 0 Pkt 100 Pcnt 0 None
1784691201 13.8 Volt 0 Pkt 0 Pkt 100 Pcnt 0 None
1784690901 13.8 Volt 0 Pkt 0 Pkt 100 Pcnt 0 None
1784690601 13.8 Volt 0 Pkt 0 Pkt 100 Pcnt 0 None
1784690301 13.8 Volt 0 Pkt 0 Pkt 100 Pcnt 0 None
1784690001 13.8 Volt 0 Pkt 0 Pkt 100 Pcnt 0 None
1784689701 13.8 Volt 0 Pkt 0 Pkt 100 Pcnt 0 None
1784689401 13.8 Volt 0 Pkt 0 Pkt 100 Pcnt 0 None
1784689101 13.8 Volt 0 Pkt 0 Pkt 100 Pcnt 0 None
1784688801 13.8 Volt 0 Pkt 0 Pkt 100 Pcnt 0 None
1784688501 13.8 Volt 0 Pkt 0 Pkt 100 Pcnt 0 None
1784688201 13.8 Volt 0 Pkt 0 Pkt 100 Pcnt 0 None
1784687901 13.8 Volt 0 Pkt 0 Pkt 100 Pcnt 0 None
1784687601 13.8 Volt 0 Pkt 0 Pkt 100 Pcnt 0 None
*Used Equation Coefficients:
Vin: 0, 0.075, 0
Rx1h: 0, 10, 0
Dg1h: 0, 10, 0
Eff1h: 0, 1, 0
A5: 0, 0, 0

  • The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
  • Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
    The sent equation coefficients is used in the equation: a * value2 + b * value + c.
  • The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
  • The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
  • All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
  • A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)