DC1PMI-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object DC1PMI-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

Time	Press*	Temp.in*	Hum*	QNH*	Temp.out*
1773303348	970.3 hPa	16.9 C deg	63.1 %	986.3 hPa	0 C deg
1773301533	970.3 hPa	15.7 C deg	65.2 %	986.3 hPa	0 C deg
1773299717	970.1 hPa	13.8 C deg	68.1 %	986.3 hPa	0 C deg
1773265843	965 hPa	18.2 C deg	54.7 %	1017.4 hPa	0 C deg
1773265682	965.1 hPa	18.3 C deg	54.6 %	1017.4 hPa	0 C deg
1773265185	965 hPa	18.5 C deg	54.2 %	1017.3 hPa	0 C deg
1773265102	965 hPa	18.6 C deg	54.2 %	1017.3 hPa	0 C deg
1773264912	965 hPa	18.6 C deg	54.3 %	1017.3 hPa	0 C deg
1773264405	965 hPa	18.4 C deg	54.8 %	1017.3 hPa	0 C deg
1773264250	965 hPa	18.4 C deg	55 %	1017.3 hPa	0 C deg
1773263227	964.9 hPa	15.6 C deg	62.8 %	964.9 hPa	0 C deg
1773247843	963 hPa	16.9 C deg	64.6 %	972.6 hPa	0 C deg
1773247358	963 hPa	17 C deg	64.6 %	972.5 hPa	0 C deg
1773244915	963.4 hPa	17.5 C deg	60.8 %	972.9 hPa	0 C deg
1773239685	959.1 hPa	22.9 C deg	49.1 %	1013.5 hPa	0 C deg
1773239176	958.7 hPa	22.7 C deg	50.1 %	1013.1 hPa	0 C deg
1773239059	958.8 hPa	22.6 C deg	50.4 %	1013.2 hPa	0 C deg
1773238144	958.9 hPa	22.7 C deg	49.9 %	965.9 hPa	0 C deg
1773237855	958.9 hPa	22.9 C deg	49.9 %	965.9 hPa	0 C deg
1773237718	958.8 hPa	22.9 C deg	50.5 %	1013.5 hPa	0 C deg
1773237684	958.8 hPa	22.9 C deg	49.7 %	1013.5 hPa	0 C deg

*Used Equation Coefficients:

Press: 0, 1, 0

Temp.in: 0, 1, 0

Hum: 0, 1, 0

QNH: 0, 1, 0

Temp.out: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)