SR5RAW-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SR5RAW-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Avg 10m*	Avg 10m*	RxPkts*	IGateDropRx*	TxPkts*
1765548718	0.03 Rx Erlang	0.02 Tx Erlang	27 count/10m	1 count/10m	19 count/10m
1765547518	0.03 Rx Erlang	0.02 Tx Erlang	22 count/10m	0 count/10m	12 count/10m
1765546318	0.02 Rx Erlang	0.01 Tx Erlang	18 count/10m	0 count/10m	5 count/10m
1765545118	0.02 Rx Erlang	0.01 Tx Erlang	16 count/10m	1 count/10m	4 count/10m
1765543918	0.02 Rx Erlang	0.01 Tx Erlang	15 count/10m	0 count/10m	4 count/10m
1765542718	0.02 Rx Erlang	0.01 Tx Erlang	19 count/10m	1 count/10m	4 count/10m
1765541518	0.02 Rx Erlang	0.01 Tx Erlang	14 count/10m	0 count/10m	3 count/10m
1765540318	0.02 Rx Erlang	0.01 Tx Erlang	14 count/10m	0 count/10m	4 count/10m
1765539118	0.02 Rx Erlang	0.01 Tx Erlang	17 count/10m	0 count/10m	5 count/10m
1765537918	0.02 Rx Erlang	0.01 Tx Erlang	17 count/10m	1 count/10m	4 count/10m
1765536718	0.02 Rx Erlang	0.01 Tx Erlang	14 count/10m	0 count/10m	4 count/10m
1765535518	0.02 Rx Erlang	0.01 Tx Erlang	17 count/10m	0 count/10m	6 count/10m
1765534318	0.02 Rx Erlang	0.01 Tx Erlang	15 count/10m	1 count/10m	4 count/10m
1765533118	0.02 Rx Erlang	0.01 Tx Erlang	18 count/10m	0 count/10m	6 count/10m
1765531918	0.02 Rx Erlang	0.01 Tx Erlang	17 count/10m	0 count/10m	5 count/10m
1765530718	0.02 Rx Erlang	0.01 Tx Erlang	19 count/10m	0 count/10m	9 count/10m
1765529518	0.02 Rx Erlang	0.01 Tx Erlang	20 count/10m	1 count/10m	7 count/10m
1765528318	0.02 Rx Erlang	0.01 Tx Erlang	21 count/10m	0 count/10m	9 count/10m
1765527118	0.02 Rx Erlang	0.01 Tx Erlang	15 count/10m	1 count/10m	5 count/10m
1765525918	0.02 Rx Erlang	0.01 Tx Erlang	14 count/10m	0 count/10m	5 count/10m
1765524718	0.02 Rx Erlang	0.01 Tx Erlang	21 count/10m	1 count/10m	6 count/10m
1765523518	0.02 Rx Erlang	0.01 Tx Erlang	17 count/10m	0 count/10m	7 count/10m
1765522334	0.02 Rx Erlang	0.01 Tx Erlang	19 count/10m	1 count/10m	5 count/10m
1765521118	0.02 Rx Erlang	0.01 Tx Erlang	22 count/10m	0 count/10m	5 count/10m
1765519918	0.02 Rx Erlang	0.01 Tx Erlang	15 count/10m	1 count/10m	7 count/10m

*Used Equation Coefficients:

Avg 10m: 0, 0.005, 0

RxPkts: 0, 1, 0

IGateDropRx: 0, 1, 0

TxPkts: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)