HP1CDZ-9 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object HP1CDZ-9. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	A2*	A3*	A4*	A5*
1757463876	14.25 Volt	0 None	0 None	0 None	0 None
1757462077	14.25 Volt	0 None	0 None	0 None	0 None
1757458477	14.25 Volt	0 None	0 None	0 None	0 None
1757454877	14.25 Volt	0 None	0 None	0 None	0 None
1757453078	14.25 Volt	0 None	0 None	0 None	0 None
1757451277	14.25 Volt	0 None	0 None	0 None	0 None
1757449478	14.25 Volt	0 None	0 None	0 None	0 None
1757447677	14.25 Volt	0 None	0 None	0 None	0 None
1757442277	14.25 Volt	0 None	0 None	0 None	0 None
1757440477	14.25 Volt	0 None	0 None	0 None	0 None
1757438679	14.25 Volt	0 None	0 None	0 None	0 None
1757431478	14.25 Volt	0 None	0 None	0 None	0 None
1757426078	14.25 Volt	0 None	0 None	0 None	0 None
1757422478	14.25 Volt	0 None	0 None	0 None	0 None
1757420678	14.25 Volt	0 None	0 None	0 None	0 None
1757418878	14.25 Volt	0 None	0 None	0 None	0 None
1757417078	14.25 Volt	0 None	0 None	0 None	0 None
1757415278	14.25 Volt	0 None	0 None	0 None	0 None
1757413478	14.25 Volt	0 None	0 None	0 None	0 None
1757409878	14.25 Volt	0 None	0 None	0 None	0 None
1757406279	14.25 Volt	0 None	0 None	0 None	0 None
1757402679	14.25 Volt	0 None	0 None	0 None	0 None
1757399079	14.25 Volt	0 None	0 None	0 None	0 None
1757395479	14.25 Volt	0 None	0 None	0 None	0 None
1757391879	14.25 Volt	0 None	0 None	0 None	0 None

*Used Equation Coefficients:

Vin: 0, 0.075, 0

A2: 0, 0, 0

A3: 0, 0, 0

A4: 0, 0, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)