N1DTA-3 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object N1DTA-3. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1784701578	15.6 Volt	1030 Pkt	260 Pkt	75 Pcnt
1784701282	15.68 Volt	1020 Pkt	260 Pkt	74 Pcnt
1784701278	15.68 Volt	1020 Pkt	260 Pkt	74 Pcnt
1784700978	15.6 Volt	1030 Pkt	270 Pkt	73 Pcnt
1784700683	15.75 Volt	1020 Pkt	270 Pkt	72 Pcnt
1784700678	15.75 Volt	1020 Pkt	270 Pkt	72 Pcnt
1784700378	15.68 Volt	1020 Pkt	270 Pkt	72 Pcnt
1784700078	15.6 Volt	1010 Pkt	270 Pkt	72 Pcnt
1784700078	15.6 Volt	1010 Pkt	270 Pkt	72 Pcnt
1784699778	15.68 Volt	1020 Pkt	260 Pkt	71 Pcnt
1784699481	15.75 Volt	970 Pkt	260 Pkt	70 Pcnt
1784699478	15.75 Volt	970 Pkt	260 Pkt	70 Pcnt
1784699194	15.75 Volt	970 Pkt	250 Pkt	69 Pcnt
1784698878	15.75 Volt	970 Pkt	260 Pkt	69 Pcnt
1784698878	15.75 Volt	970 Pkt	260 Pkt	69 Pcnt
1784698578	15.53 Volt	920 Pkt	250 Pkt	69 Pcnt
1784698279	15.45 Volt	940 Pkt	260 Pkt	69 Pcnt
1784698278	15.45 Volt	940 Pkt	260 Pkt	69 Pcnt
1784697978	15.6 Volt	940 Pkt	260 Pkt	70 Pcnt
1784697682	15.3 Volt	940 Pkt	260 Pkt	70 Pcnt
1784697678	15.3 Volt	940 Pkt	260 Pkt	70 Pcnt
1784697378	15.53 Volt	930 Pkt	260 Pkt	70 Pcnt
1784697083	15.53 Volt	920 Pkt	260 Pkt	71 Pcnt
1784697078	15.53 Volt	920 Pkt	260 Pkt	71 Pcnt
1784696778	15.53 Volt	910 Pkt	250 Pkt	71 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)