KP4TP-3 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object KP4TP-3. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Avg 10m*	Avg 10m*	RxPkts*	IGateDropRx*	TxPkts*
1753685528	0.02 Rx Erlang	0.01 Tx Erlang	14 count/10m	0 count/10m	8 count/10m
1753684328	0.02 Rx Erlang	0.01 Tx Erlang	16 count/10m	0 count/10m	8 count/10m
1753683128	0.02 Rx Erlang	0.01 Tx Erlang	15 count/10m	0 count/10m	7 count/10m
1753681928	0.02 Rx Erlang	0.01 Tx Erlang	16 count/10m	0 count/10m	7 count/10m
1753680728	0.02 Rx Erlang	0.01 Tx Erlang	17 count/10m	0 count/10m	9 count/10m
1753679559	0.02 Rx Erlang	0.01 Tx Erlang	14 count/10m	0 count/10m	6 count/10m
1753678328	0.02 Rx Erlang	0.01 Tx Erlang	16 count/10m	0 count/10m	8 count/10m
1753677128	0.02 Rx Erlang	0.01 Tx Erlang	19 count/10m	0 count/10m	9 count/10m
1753675928	0.02 Rx Erlang	0.01 Tx Erlang	14 count/10m	0 count/10m	7 count/10m
1753674728	0.03 Rx Erlang	0.01 Tx Erlang	25 count/10m	6 count/10m	10 count/10m
1753673528	0.03 Rx Erlang	0.01 Tx Erlang	22 count/10m	5 count/10m	9 count/10m
1753672328	0.02 Rx Erlang	0.01 Tx Erlang	18 count/10m	0 count/10m	8 count/10m
1753671128	0.02 Rx Erlang	0.01 Tx Erlang	15 count/10m	0 count/10m	8 count/10m
1753669928	0.02 Rx Erlang	0.01 Tx Erlang	19 count/10m	0 count/10m	9 count/10m
1753668728	0.02 Rx Erlang	0.01 Tx Erlang	16 count/10m	0 count/10m	7 count/10m
1753667528	0.02 Rx Erlang	0.01 Tx Erlang	18 count/10m	0 count/10m	8 count/10m
1753666328	0.02 Rx Erlang	0.01 Tx Erlang	20 count/10m	0 count/10m	8 count/10m
1753665128	0.02 Rx Erlang	0.01 Tx Erlang	16 count/10m	1 count/10m	7 count/10m
1753663928	0.08 Rx Erlang	0.04 Tx Erlang	67 count/10m	23 count/10m	30 count/10m
1753662728	0.03 Rx Erlang	0.01 Tx Erlang	27 count/10m	0 count/10m	12 count/10m
1753661529	0.02 Rx Erlang	0.01 Tx Erlang	20 count/10m	0 count/10m	7 count/10m
1753660328	0.02 Rx Erlang	0.01 Tx Erlang	21 count/10m	0 count/10m	8 count/10m
1753659128	0.03 Rx Erlang	0.01 Tx Erlang	21 count/10m	0 count/10m	8 count/10m
1753657928	0.03 Rx Erlang	0.01 Tx Erlang	21 count/10m	0 count/10m	7 count/10m
1753656728	0.03 Rx Erlang	0.01 Tx Erlang	28 count/10m	0 count/10m	8 count/10m

*Used Equation Coefficients:

Avg 10m: 0, 0.005, 0

RxPkts: 0, 1, 0

IGateDropRx: 0, 1, 0

TxPkts: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)