DH1FR-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object DH1FR-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Press*	Temp.in*	Hum*	Temp.out*
1785081737	1008.1 hPa	24.8 C deg	53 %	0 C deg
1785081706	1008.1 hPa	24.8 C deg	53 %	0 C deg
1785081113	1008.2 hPa	25 C deg	51 %	0 C deg
1785081106	1008.2 hPa	25 C deg	51 %	0 C deg
1785080640	1008.4 hPa	25.1 C deg	50 %	0 C deg
1785080602	1008.4 hPa	25.1 C deg	50 %	0 C deg
1785080518	1008.4 hPa	25.1 C deg	50 %	0 C deg
1785080502	1008.4 hPa	25.1 C deg	50 %	0 C deg
1785079902	1008.1 hPa	25.6 C deg	50 %	0 C deg
1785079298	1008.2 hPa	25.6 C deg	50 %	0 C deg
1785078763	1008 hPa	25.1 C deg	46 %	0 C deg
1785078704	1008 hPa	25.1 C deg	46 %	0 C deg
1785078099	1007.9 hPa	26.9 C deg	46 %	0 C deg
1785077499	1007.6 hPa	26.7 C deg	46 %	0 C deg
1785076968	1008.1 hPa	27 C deg	47 %	0 C deg
1785076935	1008.1 hPa	27 C deg	47 %	0 C deg
1785076905	1008.1 hPa	27 C deg	47 %	0 C deg
1785076299	1007.9 hPa	26.2 C deg	46 %	0 C deg
1785075705	1008.2 hPa	25.6 C deg	48 %	0 C deg
1785075115	1008 hPa	25.7 C deg	47 %	0 C deg
1785075106	1008 hPa	25.7 C deg	47 %	0 C deg
1785075099	1008 hPa	25.7 C deg	47 %	0 C deg
1785074576	1008.1 hPa	25.8 C deg	47 %	0 C deg
1785074498	1008.1 hPa	25.8 C deg	47 %	0 C deg
1785073995	1007.9 hPa	25.8 C deg	48 %	0 C deg

*Used Equation Coefficients:

Press: 0, 1, 0

Temp.in: 0, 1, 0

Hum: 0, 1, 0

QNH: 0, 1, 0

Temp.out: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)