IQ3GO-11 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object IQ3GO-11. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Rx10m*	Rx1h*	Dg10m*	Temp*	Vin*
1780536011	248 Pkt	1460 Pkt	1 Pkt	11.68 °	13.35 Volt
1780535711	240 Pkt	1450 Pkt	1 Pkt	11.68 °	13.35 Volt
1780535411	198 Pkt	1420 Pkt	1 Pkt	11.75 °	13.35 Volt
1780535111	207 Pkt	1420 Pkt	1 Pkt	11.75 °	13.35 Volt
1780534811	202 Pkt	1410 Pkt	1 Pkt	11.75 °	13.35 Volt
1780534511	197 Pkt	1410 Pkt	1 Pkt	11.75 °	13.35 Volt
1780534211	220 Pkt	1400 Pkt	1 Pkt	11.68 °	13.35 Volt
1780533911	231 Pkt	1400 Pkt	1 Pkt	11.75 °	13.35 Volt
1780533611	218 Pkt	1410 Pkt	1 Pkt	11.75 °	13.35 Volt
1780533311	255 Pkt	1400 Pkt	1 Pkt	11.75 °	13.35 Volt
1780533011	252 Pkt	1390 Pkt	0 Pkt	11.75 °	13.35 Volt
1780532711	206 Pkt	1360 Pkt	0 Pkt	11.75 °	13.35 Volt
1780532411	207 Pkt	1360 Pkt	0 Pkt	11.75 °	13.35 Volt
1780532111	210 Pkt	1370 Pkt	1 Pkt	11.75 °	13.35 Volt
1780531811	201 Pkt	1390 Pkt	0 Pkt	11.75 °	13.35 Volt
1780531511	202 Pkt	1400 Pkt	1 Pkt	11.75 °	13.35 Volt
1780531211	193 Pkt	1390 Pkt	0 Pkt	11.75 °	13.35 Volt
1780530911	190 Pkt	1420 Pkt	1 Pkt	11.75 °	13.35 Volt
1780530611	221 Pkt	1420 Pkt	0 Pkt	11.75 °	13.35 Volt
1780530311	226 Pkt	1450 Pkt	1 Pkt	11.68 °	13.35 Volt
1780530011	210 Pkt	1440 Pkt	0 Pkt	11.75 °	13.35 Volt
1780529711	220 Pkt	1440 Pkt	0 Pkt	11.75 °	13.35 Volt
1780529411	225 Pkt	1450 Pkt	0 Pkt	11.75 °	13.35 Volt
1780529111	215 Pkt	1460 Pkt	1 Pkt	11.75 °	13.35 Volt
1780528811	224 Pkt	1460 Pkt	0 Pkt	11.75 °	13.35 Volt

*Used Equation Coefficients:

Rx10m: 0, 1, 0

Rx1h: 0, 10, 0

Dg10m: 0, 1, 0

Temp: 0, 0.066, 0

Vin: 0, 0.075, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)