SR6RC Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SR6RC. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Temperatura CPU*	Obciazenie CPU*
1761477005	37 Deg.C	2 %
1761476402	41 Deg.C	2 %
1761473405	42 Deg.C	2 %
1761472801	39 Deg.C	2 %
1761471601	39 Deg.C	2 %
1761471005	43 Deg.C	2 %
1761466201	43 Deg.C	2 %
1761465602	40 Deg.C	2 %
1761465005	38 Deg.C	2 %
1761464402	36 Deg.C	2 %
1761463805	41 Deg.C	2 %
1761462605	42 Deg.C	2 %
1761461401	40 Deg.C	2 %
1761460805	38 Deg.C	2 %
1761460201	43 Deg.C	2 %
1761457802	41 Deg.C	2 %
1761457202	38 Deg.C	2 %
1761454801	40 Deg.C	2 %
1761454205	42 Deg.C	2 %
1761453602	42 Deg.C	2 %
1761451802	39 Deg.C	2 %
1761449401	42 Deg.C	2 %
1761448201	38 Deg.C	2 %
1761447001	37 Deg.C	2 %
1761445802	37 Deg.C	2 %

*Used Equation Coefficients:

Temperatura CPU: 0, 0.1, 0

Obciazenie CPU: 0, 1, 0

Value3: 0, 0, 0

Value4: 0, 0, 0

Value5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)