DO2HBA-6 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object DO2HBA-6. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*	Temp*
1761527768	12.3 Volt	80 Pkt	10 Pkt	73 Pcnt	12.8 Crad
1761527468	12.3 Volt	80 Pkt	10 Pkt	72 Pcnt	12.8 Crad
1761527167	12.3 Volt	80 Pkt	10 Pkt	69 Pcnt	12.8 Crad
1761526867	12.3 Volt	80 Pkt	10 Pkt	69 Pcnt	12.8 Crad
1761526567	12.3 Volt	80 Pkt	10 Pkt	68 Pcnt	12.8 Crad
1761526266	12.3 Volt	80 Pkt	10 Pkt	68 Pcnt	12.8 Crad
1761525966	12.3 Volt	80 Pkt	10 Pkt	65 Pcnt	12.8 Crad
1761525666	12.3 Volt	80 Pkt	10 Pkt	66 Pcnt	12.8 Crad
1761525366	12.3 Volt	80 Pkt	10 Pkt	68 Pcnt	12.8 Crad
1761524766	12.3 Volt	80 Pkt	10 Pkt	70 Pcnt	12.8 Crad
1761524765	12.3 Volt	80 Pkt	10 Pkt	70 Pcnt	12.8 Crad
1761524465	12.3 Volt	80 Pkt	10 Pkt	70 Pcnt	12.8 Crad
1761524164	12.3 Volt	80 Pkt	10 Pkt	70 Pcnt	12.8 Crad
1761523564	12.3 Volt	80 Pkt	10 Pkt	70 Pcnt	12.8 Crad
1761522663	12.3 Volt	80 Pkt	10 Pkt	68 Pcnt	12.8 Crad
1761522363	12.3 Volt	80 Pkt	10 Pkt	68 Pcnt	12.8 Crad
1761521762	12.3 Volt	80 Pkt	10 Pkt	66 Pcnt	12.8 Crad
1761521462	12.3 Volt	80 Pkt	10 Pkt	67 Pcnt	12.8 Crad
1761521162	12.3 Volt	80 Pkt	10 Pkt	67 Pcnt	12.8 Crad
1761520869	12.3 Volt	80 Pkt	10 Pkt	68 Pcnt	12.8 Crad
1761520561	12.3 Volt	80 Pkt	10 Pkt	68 Pcnt	12.8 Crad
1761520261	12.3 Volt	70 Pkt	10 Pkt	67 Pcnt	12.8 Crad
1761519960	12.3 Volt	70 Pkt	10 Pkt	69 Pcnt	12.8 Crad
1761519660	12.3 Volt	70 Pkt	10 Pkt	70 Pcnt	12.8 Crad
1761519360	12.3 Volt	70 Pkt	10 Pkt	72 Pcnt	12.8 Crad

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Temp: 0, 0.1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)