W8SP-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object W8SP-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Eff1h*	Temp*
1789946213	14.1 Volt	0 Pkt	66 Pcnt	24 C
1789944413	14.1 Volt	0 Pkt	33 Pcnt	24 C
1789942613	14.1 Volt	0 Pkt	40 Pcnt	24 C
1789940813	14.1 Volt	0 Pkt	4 Pcnt	24 C
1789937213	14.1 Volt	0 Pkt	1 Pcnt	24 C
1789935413	14.1 Volt	0 Pkt	3 Pcnt	23.5 C
1789933613	14.1 Volt	0 Pkt	8 Pcnt	23.5 C
1789931813	14.1 Volt	10 Pkt	37 Pcnt	23.5 C
1789930013	14.1 Volt	10 Pkt	14 Pcnt	23.5 C
1789928242	14.1 Volt	0 Pkt	1 Pcnt	24 C
1789926413	14.1 Volt	0 Pkt	2 Pcnt	23.5 C
1789924613	14.1 Volt	0 Pkt	0 Pcnt	23.5 C
1789922813	14.1 Volt	0 Pkt	0 Pcnt	23.5 C
1789921013	14.1 Volt	0 Pkt	0 Pcnt	23.5 C
1789919213	14.1 Volt	0 Pkt	0 Pcnt	23.5 C
1789917413	14.1 Volt	0 Pkt	0 Pcnt	23.5 C
1789915614	14.1 Volt	0 Pkt	2 Pcnt	23.5 C
1789913813	14.1 Volt	0 Pkt	2 Pcnt	23.5 C
1789912013	14.1 Volt	0 Pkt	2 Pcnt	23.5 C
1789910214	14.1 Volt	0 Pkt	5 Pcnt	23.5 C
1789908414	14.1 Volt	0 Pkt	29 Pcnt	23.5 C
1789906614	14.1 Volt	10 Pkt	47 Pcnt	23.5 C
1789904814	14.1 Volt	0 Pkt	30 Pcnt	23.5 C
1789903014	14.1 Volt	0 Pkt	2 Pcnt	23.5 C
1789901214	14.1 Volt	0 Pkt	1 Pcnt	23.5 C

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Temp: 0, 0.5, -64

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)