SP6RJ-FM Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SP6RJ-FM. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Temperatura CPU*	Obciazenie CPU*
1753640402	38 Deg.C	3 %
1753639805	37 Deg.C	3 %
1753639202	36 Deg.C	3 %
1753638605	36 Deg.C	3 %
1753637402	37 Deg.C	3 %
1753636202	37 Deg.C	3 %
1753634405	37 Deg.C	3 %
1753633229	37 Deg.C	3 %
1753632605	37 Deg.C	3 %
1753632002	37 Deg.C	3 %
1753630802	38 Deg.C	3 %
1753629601	38 Deg.C	3 %
1753629001	38 Deg.C	3 %
1753627801	38 Deg.C	3 %
1753626602	38 Deg.C	3 %
1753626005	37 Deg.C	3 %
1753624802	37 Deg.C	3 %
1753624205	37 Deg.C	3 %
1753623015	37 Deg.C	3 %
1753622402	37 Deg.C	3 %
1753621805	38 Deg.C	3 %
1753620601	37 Deg.C	3 %
1753620005	37 Deg.C	3 %
1753619402	37 Deg.C	3 %
1753618805	38 Deg.C	3 %

*Used Equation Coefficients:

Temperatura CPU: 0, 0.1, 0

Obciazenie CPU: 0, 1, 0

Value3: 0, 0, 0

Value4: 0, 0, 0

Value5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)