VK2HFF-9 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object VK2HFF-9. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Temp*	SoC*	FanDC*	BattV*	Batt2_B2SoC*
1788580883	34 Deg.C	94 SoC%	5 DutyCyc	12.9 V	100 SoC%
1788579083	34 Deg.C	94 SoC%	5 DutyCyc	12.9 V	100 SoC%
1788577283	34 Deg.C	94 SoC%	5 DutyCyc	12.8 V	100 SoC%
1788575484	33 Deg.C	94 SoC%	5 DutyCyc	12.8 V	100 SoC%
1788573684	33 Deg.C	94 SoC%	0 DutyCyc	12.7 V	100 SoC%
1788571884	32 Deg.C	94 SoC%	0 DutyCyc	12.8 V	100 SoC%
1788570084	31 Deg.C	94 SoC%	0 DutyCyc	12.8 V	100 SoC%
1788568284	30 Deg.C	94 SoC%	0 DutyCyc	12.9 V	100 SoC%
1788566484	29 Deg.C	94 SoC%	0 DutyCyc	12.9 V	100 SoC%
1788564683	28 Deg.C	94 SoC%	0 DutyCyc	12.9 V	100 SoC%
1788562883	27 Deg.C	94 SoC%	0 DutyCyc	12.8 V	100 SoC%
1788561083	25 Deg.C	94 SoC%	0 DutyCyc	12.6 V	100 SoC%
1788559283	23 Deg.C	94 SoC%	0 DutyCyc	12.6 V	100 SoC%
1788557485	0 Deg.C	94 SoC%	0 DutyCyc	12.5 V	100 SoC%
1788555684	0 Deg.C	94 SoC%	0 DutyCyc	12.5 V	100 SoC%
1788553883	0 Deg.C	94 SoC%	0 DutyCyc	12.5 V	100 SoC%
1788552083	0 Deg.C	94 SoC%	0 DutyCyc	12.5 V	100 SoC%
1788550283	0 Deg.C	94 SoC%	0 DutyCyc	12.5 V	100 SoC%
1788548484	0 Deg.C	95 SoC%	0 DutyCyc	12.5 V	100 SoC%
1788546683	0 Deg.C	95 SoC%	0 DutyCyc	12.5 V	100 SoC%
1788544884	0 Deg.C	95 SoC%	0 DutyCyc	12.5 V	100 SoC%
1788543084	0 Deg.C	95 SoC%	0 DutyCyc	12.5 V	100 SoC%
1788541284	0 Deg.C	95 SoC%	0 DutyCyc	12.5 V	100 SoC%
1788539482	22 Deg.C	96 SoC%	0 DutyCyc	12.5 V	100 SoC%
1788537683	22 Deg.C	96 SoC%	0 DutyCyc	12.5 V	100 SoC%

*Used Equation Coefficients:

Temp: 0, 1, 0

SoC: 0, 1, 0

FanDC: 0, 1, 0

BattV: 0, 0.1, 0

Batt2_B2SoC: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)