HS6KLJ-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object HS6KLJ-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	RF->INET*	AllCount*	AllDrop*
1772754551	4 Pkts	24 Pkts	12 Pkts
1772750951	3 Pkts	16 Pkts	6 Pkts
1772747351	6 Pkts	26 Pkts	9 Pkts
1772743751	6 Pkts	24 Pkts	8 Pkts
1772740151	6 Pkts	34 Pkts	14 Pkts
1772736551	7 Pkts	30 Pkts	14 Pkts
1772732951	6 Pkts	24 Pkts	11 Pkts
1772729351	6 Pkts	29 Pkts	10 Pkts
1772725751	6 Pkts	25 Pkts	9 Pkts
1772722151	0 Pkts	0 Pkts	0 Pkts
1772721818	7 Pkts	27 Pkts	9 Pkts
1772718218	7 Pkts	25 Pkts	10 Pkts
1772714618	6 Pkts	26 Pkts	12 Pkts
1772711017	5 Pkts	30 Pkts	14 Pkts
1772707445	3 Pkts	14 Pkts	9 Pkts
1772703838	2 Pkts	10 Pkts	8 Pkts
1772700217	1 Pkts	6 Pkts	5 Pkts
1772699190	2 Pkts	12 Pkts	10 Pkts
1772695590	0 Pkts	0 Pkts	0 Pkts
1772695382	1 Pkts	10 Pkts	9 Pkts
1772692550	2 Pkts	16 Pkts	14 Pkts
1772688950	3 Pkts	14 Pkts	11 Pkts
1772685350	2 Pkts	22 Pkts	9 Pkts
1772681750	4 Pkts	23 Pkts	11 Pkts
1772678164	5 Pkts	27 Pkts	14 Pkts

*Used Equation Coefficients:

RF->INET: 0, 1, 0

INET->RF: 0, 1, 0

Repeater: 0, 1, 0

AllCount: 0, 1, 0

AllDrop: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)