N5QHO-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object N5QHO-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*	Temp*
1780614182	14.1 Volt	120 Pkt	80 Pkt	99 Pcnt	-64 F
1780610582	14.1 Volt	100 Pkt	70 Pkt	100 Pcnt	-64 F
1780603382	14.1 Volt	130 Pkt	90 Pkt	93 Pcnt	-64 F
1780599782	14.1 Volt	100 Pkt	80 Pkt	96 Pcnt	-64 F
1780596182	14.1 Volt	110 Pkt	80 Pkt	97 Pcnt	-64 F
1780592582	14.1 Volt	110 Pkt	90 Pkt	95 Pcnt	-64 F
1780588982	14.1 Volt	100 Pkt	70 Pkt	76 Pcnt	-64 F
1780585383	14.1 Volt	90 Pkt	70 Pkt	94 Pcnt	-64 F
1780581783	14.1 Volt	110 Pkt	80 Pkt	72 Pcnt	-64 F
1780578183	14.1 Volt	110 Pkt	80 Pkt	58 Pcnt	-64 F
1780574583	14.1 Volt	110 Pkt	70 Pkt	59 Pcnt	-64 F
1780570983	14.1 Volt	160 Pkt	80 Pkt	68 Pcnt	-64 F
1780567384	14.1 Volt	130 Pkt	70 Pkt	60 Pcnt	-64 F
1780563783	14.1 Volt	140 Pkt	80 Pkt	61 Pcnt	-64 F
1780560183	14.1 Volt	110 Pkt	70 Pkt	57 Pcnt	-64 F
1780556583	14.1 Volt	150 Pkt	80 Pkt	56 Pcnt	-64 F
1780552984	14.1 Volt	120 Pkt	70 Pkt	50 Pcnt	-64 F
1780549384	14.1 Volt	130 Pkt	80 Pkt	67 Pcnt	-64 F
1780545784	14.1 Volt	110 Pkt	70 Pkt	74 Pcnt	-64 F
1780542184	14.1 Volt	100 Pkt	70 Pkt	79 Pcnt	-64 F
1780538584	14.1 Volt	90 Pkt	70 Pkt	99 Pcnt	-64 F
1780534984	14.1 Volt	90 Pkt	60 Pkt	100 Pcnt	-64 F
1780531384	14.1 Volt	90 Pkt	60 Pkt	100 Pcnt	-64 F
1780527784	14.1 Volt	110 Pkt	70 Pkt	98 Pcnt	-64 F
1780524184	14.1 Volt	90 Pkt	70 Pkt	100 Pcnt	-64 F

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Temp: 0, 0.5, -64

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)