TA3HRJ-8 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object TA3HRJ-8. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 >>

Time	Celsius*	Rel_Hum*	Atm_Press*
1761553254	27 C	73.42 %	1014.38 hPa
1761545049	24 C	70.53 %	1010 hPa
1761536173	23.2 C	70.18 %	1013.13 hPa
1761527140	23.1 C	70.19 %	1014 hPa
1761518107	23.4 C	69.69 %	1014.75 hPa
1761509074	24 C	68.66 %	1015.63 hPa
1761500041	25.9 C	67.59 %	1013.88 hPa
1761491008	28.2 C	69.09 %	1013.13 hPa
1761481975	28.9 C	71.1 %	1015.38 hPa
1761463909	22.6 C	73.06 %	1016.88 hPa
1761454876	19.9 C	70.54 %	1016.38 hPa
1761445843	19.6 C	69.67 %	1017.13 hPa
1761427777	21.7 C	68.16 %	1017.75 hPa
1761418744	23.4 C	66.72 %	1018.63 hPa
1761409711	27.4 C	64.42 %	1016.88 hPa
1761400678	30 C	66.84 %	1015.5 hPa
1761391645	30.3 C	71.59 %	1016.25 hPa
1761382612	28.7 C	73.87 %	1016.63 hPa
1761373579	24.9 C	70.28 %	1015.5 hPa
1761365893	24.8 C	69.75 %	1013.63 hPa
1761356860	25.2 C	69.5 %	1013 hPa
1761347827	25.6 C	69.34 %	1013.88 hPa
1761338794	25.8 C	69.27 %	1013.5 hPa
1761329761	26.4 C	68.96 %	1013.63 hPa
1761320728	27.6 C	69 %	1012.88 hPa

*Used Equation Coefficients:

Celsius: 0, 0.1, -50

Rel_Hum: 0, 0.01, 0

Atm_Press: 0, 0.125, 0

Value4: 0, 1, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)