DL6DBZ-9 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object DL6DBZ-9. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

Time	Celsius*	Rel_Hum*	Atm_Press*	GAS*
1788565577	21.8 C	48.55 %	1016.75 hPa	75.52 %
1788564671	22 C	48.5 %	1023.88 hPa	73.5 %
1788563766	22.2 C	48.42 %	1018.25 hPa	71.51 %
1788562861	22.4 C	48.29 %	1020 hPa	68.16 %
1788561957	22.6 C	48.3 %	1018.38 hPa	66.78 %
1788561051	22.7 C	48.35 %	1016.63 hPa	62.73 %
1788560146	22.9 C	48.31 %	1017.13 hPa	61.93 %
1788559241	23 C	48.3 %	1017.38 hPa	59.83 %
1788558336	23.1 C	48.3 %	1017.25 hPa	59.83 %
1788557432	23.2 C	48.33 %	1019.63 hPa	58.27 %
1788556526	23.3 C	48.29 %	1021.13 hPa	54.94 %
1788555621	23.4 C	48.21 %	1016.38 hPa	53.44 %
1788554716	23.5 C	48.16 %	1015.88 hPa	53.44 %
1788553811	23.6 C	48.06 %	1015.75 hPa	51.45 %
1788552907	23.8 C	47.94 %	1016.38 hPa	49.49 %
1788552002	23.9 C	47.74 %	1016.38 hPa	47.32 %
1788551097	24 C	47.44 %	1015.38 hPa	45.18 %
1788550192	24.3 C	47.05 %	1015.5 hPa	39.41 %
1788549287	24.6 C	46.5 %	1016 hPa	34.96 %
1788548383	25.1 C	45.79 %	1013.25 hPa	26.69 %
1788547477	25.8 C	44.71 %	1015.63 hPa	14.18 %

*Used Equation Coefficients:

Celsius: 0, 0.1, -50

Rel_Hum: 0, 0.01, 0

Atm_Press: 0, 0.125, 0

GAS: 0, 0.01, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)