IR1BK Telemetry

This is the latest recevied telemetry packets stored in our database for station/object IR1BK. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Rx10m*	Rx1h*	Eff*
1761477039	3 Pkt	20 Pkt	74 Pcnt
1761476739	4 Pkt	20 Pkt	74 Pcnt
1761475838	4 Pkt	10 Pkt	74 Pcnt
1761475538	3 Pkt	20 Pkt	74 Pcnt
1761475237	5 Pkt	20 Pkt	74 Pcnt
1761474637	0 Pkt	10 Pkt	73 Pcnt
1761474336	2 Pkt	10 Pkt	73 Pcnt
1761473736	3 Pkt	10 Pkt	74 Pcnt
1761473436	2 Pkt	10 Pkt	74 Pcnt
1761473135	2 Pkt	20 Pkt	74 Pcnt
1761472835	0 Pkt	20 Pkt	74 Pcnt
1761472535	4 Pkt	20 Pkt	74 Pcnt
1761471934	2 Pkt	20 Pkt	74 Pcnt
1761471634	2 Pkt	20 Pkt	74 Pcnt
1761471033	2 Pkt	20 Pkt	74 Pcnt
1761470733	3 Pkt	20 Pkt	74 Pcnt
1761470439	3 Pkt	20 Pkt	74 Pcnt
1761469532	5 Pkt	20 Pkt	74 Pcnt
1761468931	4 Pkt	20 Pkt	74 Pcnt
1761468631	3 Pkt	20 Pkt	74 Pcnt
1761468331	3 Pkt	20 Pkt	74 Pcnt
1761468030	4 Pkt	20 Pkt	74 Pcnt
1761467730	6 Pkt	20 Pkt	74 Pcnt
1761467129	3 Pkt	20 Pkt	74 Pcnt
1761466829	3 Pkt	20 Pkt	74 Pcnt

*Used Equation Coefficients:

Rx10m: 0, 1, 0

Rx1h: 0, 10, 0

Dg10m: 0, 1, 0

DgR: 0, 0.001, 0

Eff: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)