XE2J-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object XE2J-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1780549101	13.13 Volt	80 Pkt	40 Pkt	57 Pcnt
1780548202	13.05 Volt	90 Pkt	40 Pkt	58 Pcnt
1780547301	13.13 Volt	80 Pkt	40 Pkt	57 Pcnt
1780546401	13.13 Volt	80 Pkt	50 Pkt	57 Pcnt
1780545501	13.13 Volt	80 Pkt	40 Pkt	53 Pcnt
1780544601	13.13 Volt	80 Pkt	40 Pkt	53 Pcnt
1780543702	13.13 Volt	80 Pkt	40 Pkt	51 Pcnt
1780542802	13.2 Volt	70 Pkt	40 Pkt	47 Pcnt
1780541901	13.2 Volt	70 Pkt	40 Pkt	48 Pcnt
1780541001	13.2 Volt	70 Pkt	40 Pkt	48 Pcnt
1780540101	13.2 Volt	90 Pkt	50 Pkt	53 Pcnt
1780539201	13.2 Volt	100 Pkt	50 Pkt	57 Pcnt
1780538301	13.2 Volt	110 Pkt	50 Pkt	59 Pcnt
1780537401	13.2 Volt	110 Pkt	60 Pkt	59 Pcnt
1780536501	13.2 Volt	100 Pkt	50 Pkt	55 Pcnt
1780535601	13.28 Volt	90 Pkt	50 Pkt	53 Pcnt
1780534702	13.28 Volt	90 Pkt	50 Pkt	53 Pcnt
1780533801	13.35 Volt	90 Pkt	40 Pkt	49 Pcnt
1780532901	13.35 Volt	80 Pkt	40 Pkt	45 Pcnt
1780532001	11.48 Volt	90 Pkt	40 Pkt	46 Pcnt
1780531102	13.35 Volt	90 Pkt	40 Pkt	48 Pcnt
1780530202	13.43 Volt	90 Pkt	50 Pkt	47 Pcnt
1780529302	13.58 Volt	100 Pkt	50 Pkt	49 Pcnt
1780528401	13.73 Volt	90 Pkt	40 Pkt	49 Pcnt
1780527501	14.1 Volt	90 Pkt	40 Pkt	48 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Temp: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)